Thin paints and enamels, clean tools and strip old paint.

Intellimix Touch mixing system Wagner
Key features
- Mixing ratio0.1:1 – 50:1 (by volume)
- Accuracy+/- 1%
- Product pressure (bar)0,5 - 250
- Supply air pressure (bar)6
- Flow range100-3000 cc/min
- Ambient temperature5-40° C
What it is
Intellimix Touch mixing system Wagner. Key specifications: mixing ratio 0.1:1 – 50:1 (by volume), accuracy +/- 1%, product pressure (bar) 0,5 - 250.
These are spray painting systems and guns: airless pumps, spray guns, pressure pots, two-component systems and powder coating systems.
What it is for
Used for coating wood, metal and masonry surfaces.
How to use it
Prepare and strain the product to the stated viscosity, choose the right tip and set the pressure and flow rate with a test on cardboard. Mask off anything that needs protecting and spray at a constant distance, perpendicular to the surface, with parallel overlapping passes. After use, flush the circuit immediately with the solvent or water suited to the product; work with a vapour or dust mask in a ventilated area.
Where it is used
- Vehicle body repair
- Industrial construction
- Mechanical engineering industry
Technical data
- Mixing ratio: 0.1:1 – 50:1 (by volume)
- Accuracy: +/- 1%
- Product pressure (bar): 0,5 - 250
- Supply air pressure (bar): 6
- Flow range: 100-3000 cc/min
- Ambient temperature: 5-40° C
- Product viscosity: 20-10000 mPas
- Voltage: 230 V, 50 Hz
- Maximum configuration: Up to 4A-3B-1C
- Washing solvents: 2A-1B
- Max number of recipes: 100
Who it is for
Designed for vehicle body repairers, metal fabricators, furniture makers and construction painters.
Related products
- Automatic gun movement system with 3D scanning Dynamic 3D Wagner
- WICOS operating and control system Wagner
- Masking paper with adhesive tape, 20 m roll — from the category Paper Masking Tapes
- Filtering face mask Steelpro 2288 MM1 FFP1 NR Neri 151153 — from the category Dust and Gas Respirators
- Wallpaper stripper Strap Chemical Roadmaster — from the category Solvents and Thinners for Paints and Coatings
- Browse the whole category: Misting and Spraying Systems
Before you order
In your request, please state the supply voltage, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 11
| Mixing ratio | 0.1:1 – 50:1 (by volume) |
|---|---|
| Accuracy | +/- 1% |
| Product pressure (bar) | 0,5 - 250 |
| Supply air pressure (bar) | 6 |
| Flow range | 100-3000 cc/min |
| Ambient temperature | 5-40° C |
| Product viscosity | 20-10000 mPas |
| Voltage | 230 V, 50 Hz |
| Maximum configuration | Up to 4A-3B-1C |
| Washing solvents | 2A-1B |
| Max number of recipes | 100 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Protect against rust and finish railings, structures and metal roofing.
Connect blow guns, couplings and tools to the compressor line for blowing, inflating and working.
For safety
Protect the airways from dust, fumes, gases and vapours during work.
Protect the body and clothing from dust, splashes and dirt; disposable after use.





