0 Quotes 0Compare
0 Compare 0 Quotes

Wall Sanders, Polishers and Power Floats

27 products · Grinders and Rotary Tools

This collection brings together machines for sanding, polishing and floating walls and ceilings: sanders for plasterboard and plaster, with a telescopic pole for working at height, and power floats for finishing surfaces.

Types available

  • Long-reach wall sanders: with telescopic pole and 225 mm disc, corded or cordless (DeWalt, Stanley, Makita).
  • Sanders for walls and plasterboard: with dust bag or vacuum connection (Breaker, Pavan).
  • Electric power floats: for finishing plaster (Maltech).

How to choose

Consider the disc diameter, the power, the pole length and the weight, which is important when working at height. For walls and ceilings, a machine that can be connected to a vacuum is advisable to limit dust. Cordless versions give more freedom, while corded ones work with no limit on battery life.

Always wear safety glasses and a dust mask when sanding, and change the abrasive disc when it loses its bite.

Every supply is on a quotation basis: tell us the model, quantity and intended use and the AMES team will prepare a tailored offer.

Wall sander: corded, cordless or long-reach?
27 results · page 1/2
Frequently asked questions: Wall Sanders, Polishers and Power Floats
What is a wall sander with a pole used for?

It is used to sand plaster, filler and plasterboard on walls and ceilings without climbing onto trestles or ladders. The telescopic pole allows you to work at height with the machine always well supported. It is used by painters, plasterboard fitters and installers to finish surfaces before painting.

Sander with dust bag or with vacuum connection: which should I choose?

The dust bag collects dust simply, but it must be emptied often and lets some fine dust escape. The vacuum connection links the machine to a filtered vacuum cleaner, which is cleaner in occupied rooms. For occupied interiors or sites with a lot of gypsum dust, connecting to a vacuum reduces the dust in the air.

Which disc diameter and which power should I use for sanding plasterboard?

For plasterboard and fine plaster, the 225 mm disc is common, as on the DeWalt DWE7800-QS 225 mm 450 W plasterboard sander. Wattage affects the ability to work for a long time without overheating. For frequent use, a higher power is better, such as the Stanley Fatmax 750 W 225 mm wall sander.

What is an electric plaster float used for?

An electric float finishes fresh plaster by smoothing the surface with rotating blades. It reduces the work compared with hand floating on large surfaces and gives a more even finish. Examples in the catalogue are the Maltech M500 electric float and the Imer Group Speedy electric plaster float, to be chosen according to the surface to be treated.

How do I choose the length of the telescopic pole?

Measure the highest point you need to reach and choose a pole that covers it without making you work with your arms outstretched. Check the maximum length in the data sheet, as it can vary even between models of the same brand, such as the Breaker SPC 200 milling machines in 100 cm and 140 cm versions. Shorter poles are more manageable, longer ones heavier.

What health risks does dry sanding involve?

Dry sanding produces a lot of fine gypsum and plaster dust, which can irritate the eyes and the respiratory tract. D.Lgs. 81/2008 (the Italian workplace safety law) requires the assessment of dust risk also during finishing work. Use a suitable mask and eye protection, ventilate the room and connect the machine to a vacuum cleaner whenever possible.

How do I use a battery wall sander without tiring?

Hold the machine with two hands and work with slow, steady movements, letting the disc do the work without pressing against the wall. Adjust the pole height to avoid awkward positions. Check the battery charge before starting, as with the Makita DSL801ZU LXT battery wall sander.