Allow climbing, descending and locking off along the rope, protecting against falls from height.
Rope BEAM 11 mm Petzl
Key features
- RegulationsEN 1891
- Diameter (mm)11,3
- MaterialPolyester (sheath), polyamide (core)
- Weight per metre (g)90
- Breaking load (kN)40
- Breaking load with figure 8 knot (kN)20
What it is
BEAM 11 mm (code R101CA00) is a Petzl semi-static rope, compliant with EN 1891. It is intended for professional use in work at height, rope access and rescue, in accordance with the manufacturer's instructions.
The rope is a cable of braided synthetic fibres, sold by the metre, in coils or already terminated with sewn eyes, used for work at height as a safety, access or rest line. It can be semi-static, with little stretch, or dynamic, which absorbs part of the energy of a fall.
What it is for
Used as an anchor point in fall protection systems, for work at height, where access and restraint must be ensured for the whole job and for fall protection, as part of a fall arrest or work restraint system.
How to use it
Choose the type according to the application: semi-static for access and rope positioning, dynamic where a fall is anticipated. Connect it with suitable terminations and connectors and protect it from sharp edges, heat, solvents and abrasion. Before every use, check its whole length for cuts, fraying, bulges and stiff spots. A rope that has held a fall or is in doubt is withdrawn from service; store it clean and dry.
Where it is used
- Forest management
- Civil protection
- Workplace safety and PPE
Technical data
- Regulations: EN 1891
- Diameter (mm): 11,3
- Material: Polyester (sheath), polyamide (core)
- Weight per metre (g): 90
- Breaking load (kN): 40
- Breaking load with figure 8 knot (kN): 20
- Stopping force (factor 0.3) (kN): 5,9
- No. of falls (factor 1): > 20
- Static elongation: 2,5%
- Construction: 32 spindles
- Sheath percentage: 36%
Who it is for
Designed for building maintenance operatives, forestry workers, arborists and health and safety officers.
Related products
- Rope CONTROL 12.5 mm Petzl
- Rope AXIS 11mm with two sewn terminations Petzl
- Harness Volt Wind, international version, Petzl — from the category Fall Arrest Harnesses
- Karabiner FREINO Z Petzl — from the category Safety Karabiners
- Structural Anchor Coeur Stainless, Petzl — from the category Horizontal and Vertical Lifeline Anchors
- Browse the whole category: Ropes and Temporary Lifelines
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 12
| Item code | R101CA00 |
|---|---|
| Regulations | EN 1891 |
| Diameter (mm) | 11,3 |
| Material | Polyester (sheath), polyamide (core) |
| Weight per metre (g) | 90 |
| Breaking load (kN) | 40 |
| Breaking load with figure-8 knot (kN) | 20 |
| Stopping force (factor 0.3) (kN) | 5,9 |
| No. of falls (factor 1) | > 20 |
| Static elongation | 2,5% |
| Construction | 32 spindles |
| Sheath percentage | 36% |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect harnesses, lanyards and anchors to protect against falls when working at height.
Connect the harness to the anchor and absorb the jolt in the event of a fall from height.
For safety
Protect against falls from height by supporting the body during work at height.
Protect the head from impacts and falling objects on site.





