A.M.E.S. srlAdjustable square 'Quattro'
Check and transfer right angles and bevels on wood, metal, tiles and masonry.
Pica
Marker Pica Powder
Key features
- TypeDeep-hole spray marker, non-contact
- Marking depth (cm)Up to 25
- Min hole diameter (mm)3
- ColourGypsum-based fluorescent green
- DurationUp to 1500 sprays
- Dispenser360° spray
What it is
Marker Pica Powder. Key specifications: type Deep-hole spray marker, non-contact, min hole diameter (mm) 3, colour Gypsum-based fluorescent green.
The marker is a felt-tip pen, carpenter's pencil, crayon, chalk or marking spray paint that leaves legible marks on wood, metal, masonry, asphalt and other site surfaces.
What it is for
Used for marking out lines, dimensions and reference points before work begins.
How to use it
Clean and dry the point to be marked, removing dust and oil. Draw with steady pressure, using a square or rule as a guide. Sharpen pencils with a knife or sharpener and replace leads when they are used up. Recap marker pens immediately after use to stop the ink drying out.
Where it is used
- Residential construction
- Renovation
Technical data
- Type: Deep-hole spray marker, non-contact
- Min hole diameter (mm): 3
- Colour: Gypsum-based fluorescent green
- Duration: Up to 1500 sprays
- Dispenser: 360° spray
- Spare parts: Charging
Who it is for
Designed for formwork carpenters, joiners and bricklayers.
Related products
- Marker Pica Visor
- Classic marker
- Flange square — from the category Squares
- Tape measures SUN — from the category Tape Measures
- Marking powders (1-47-803) Stanley — from the category Chalk Lines and Marking Chalk
- Browse the whole category: Markers and Spray Markers
Before you order
In your request, please state the colour, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 7
| Type | Deep-hole spray marker, non-contact |
|---|---|
| Marking depth (cm) | Up to 25 |
| Min hole diameter (mm) | 3 |
| Colour | Gypsum-based fluorescent green |
| Duration | Up to 1500 sprays |
| Dispenser | 360° spray |
| Spare parts | Charging |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlTape measures 'NEW Popular'
Measure lengths and distances on site and in the workshop with a retractable tape.
MetricaTape measure Reverxo MetricaCode 08105
Measure lengths, spans and distances to cut and lay to the correct dimensions.
A.M.E.S. srlTelescopic rule
Measure and mark lengths with a rigid rule that stays straight on the workpiece.