Skip to content
0 Quotes 0Compare
All Pedrollo products

Electric pump MC-F Pedrollo

Code MC-F

Key features

  • CapacityUp to 1600 l/min (96 m³/h)
  • Motor2-pole
  • Motor housingCast iron
  • HeadUp to 25 m
  • Liquid temperatureUp to +40 °C
  • Solids passageUp to Ø 50 mm for MC /50-F – up to Ø 65 mm for MC /65-F
See all 12 specifications

What it is

Electric pump MC-F Pedrollo. Key specifications: capacity Up to 1600 l/min (96 m³/h), motor 2-pole, motor housing Cast iron.

A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.

Where it is used

  • Water engineering works
  • Civil protection

Technical data

  • Capacity: Up to 1600 l/min (96 m³/h)
  • Motor: 2-pole
  • Motor housing: Cast iron
  • Head: Up to 25 m
  • Liquid temperature: Up to +40 °C
  • Solids passage: Up to Ø 50 mm for MC /50-F – up to Ø 65 mm for MC /65-F
  • Maximum operating depth: Up to 10 m (with a suitably long power cable)
  • Minimum immersion for continuous duty: 320 mm for MC /50-F – 360 mm for MC /65-F
  • Protection: IP68
  • Pump body: Cast iron
  • Impeller: AISI 304 investment-cast stainless steel
  • Drive shaft: Stainless steel AISI 431

Who it is for

Designed for plumbers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 12
CapacityUp to 1600 l/min (96 m³/h)
Motor2-pole
Motor housingCast iron
HeadUp to 25 m
Liquid temperatureUp to +40 °C
Solids passageUp to Ø 50 mm for MC /50-F – up to Ø 65 mm for MC /65-F
Maximum operating depthUp to 10 m (with a suitably long power cable)
Minimum immersion for continuous duty320 mm for MC /50-F – 360 mm for MC /65-F
ProtectionIP68
Pump bodyCast iron
ImpellerAISI 304 investment-cast stainless steel
Drive shaftStainless steel AISI 431

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

For safety