Skip to content
0 Quotes 0Compare
All Pedrollo products

Submersible pump VXC 35-45 Pedrollo

Also known as: submersible pump

Code VXC

Key features

  • CapacityUp to 650 l/min (39 m³/h)
  • Motor2-pole
  • Motor housingCast iron
  • HeadUp to 14 m
  • Liquid temperatureUp to +40 °C
  • Solids passageUp to Ø 40 mm for VXC /35 – up to Ø 50 mm for VXC /45
See all 12 specifications

What it is

Submersible pump VXC 35-45 Pedrollo. Key specifications: capacity Up to 650 l/min (39 m³/h), motor 2-pole, motor housing Cast iron.

A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.

Where it is used

  • Water engineering works
  • Civil protection

Technical data

  • Capacity: Up to 650 l/min (39 m³/h)
  • Motor: 2-pole
  • Motor housing: Cast iron
  • Head: Up to 14 m
  • Liquid temperature: Up to +40 °C
  • Solids passage: Up to Ø 40 mm for VXC /35 – up to Ø 50 mm for VXC /45
  • Maximum operating depth: Up to 10 m (with a suitably long power cable)
  • Minimum immersion for continuous duty (mm): 305
  • Protection: IP68
  • Pump body: Cast iron
  • Impeller: Stainless steel AISI 304
  • Drive shaft: Stainless steel AISI 431

Who it is for

Designed for plumbers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 12
CapacityUp to 650 l/min (39 m³/h)
Motor2-pole
Motor housingCast iron
HeadUp to 14 m
Liquid temperatureUp to +40 °C
Solids passageUp to Ø 40 mm for VXC /35 – up to Ø 50 mm for VXC /45
Maximum operating depthUp to 10 m (with a suitably long power cable)
Minimum immersion for continuous duty (mm)305
ProtectionIP68
Pump bodyCast iron
ImpellerStainless steel AISI 304
Drive shaftStainless steel AISI 431

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlNon-toxic coiled hose

Carry water for irrigating, washing and supplying machines in the garden and on site.

A.M.E.S. srlBrass socket art. 297

Join pipes and components of water systems with threaded joints and reducers.

For safety