Thin paints and enamels, clean tools and strip old paint.

Automatic electrostatic gun GA 5000EA Wagner
Key features
- Application techniquesAirspray, solvent-based electrostatic
- Dimensions (mm)272 × 74 × 135
- Weight (g)1.200
- Max product pressure (bar)8
- Max sound pressure level (dB(A))73
- Material conductivity18,5-123 MΩ.cm
What it is
Automatic electrostatic gun GA 5000EA Wagner. Key specifications: application techniques Airspray, solvent-based electrostatic, dimensions (mm) 272 × 74 × 135, weight (g) 1.200.
The electrostatic powder gun charges the coating powder as it leaves the nozzle, so that it adheres to the earthed metal workpiece. The charge is obtained with high voltage (corona effect) or by friction (tribo). It may be hand-held or mounted on an automatic system.
What it is for
Used for coating wood, metal and masonry surfaces.
How to use it
The workpiece to be coated, metallic, clean and degreased, must be earthed. Connect the gun to the powder feed and to clean, dry compressed air, and adjust the powder flow and charge. Spray at a constant distance in a booth with extraction, and the workpiece then goes into the oven for curing. Work with a dust mask and with the gun disconnected during cleaning.
Where it is used
- Vehicle body repair
- Mechanical engineering industry
Technical data
- Application techniques: Airspray, solvent-based electrostatic
- Dimensions (mm): 272 × 74 × 135
- Weight (g): 1.200
- Max product pressure (bar): 8
- Max sound pressure level (dB(A)): 73
- Material conductivity: 18,5-123 MΩ.cm
- Material conductivity lowr: 6,2-123 MΩ.cm
- Nozzle size (mm): 0,3 - 2
- Operating temperature: 5-40 °C
Who it is for
Designed for vehicle body repairers, metal fabricators and furniture makers.
Related products
- Automatic electrostatic gun GA 5000EAC Wagner
- Automatic gun Tribo PEA-T3 Wagner
- Green paper tape — from the category Paper Masking Tapes
- Respirator 3M 7503 Neri 151024 — from the category Dust and Gas Respirators
- Cleaning thinner 5L Carver — from the category Solvents and Thinners for Paints and Coatings
- Browse the whole category: Misting and Spraying Systems
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 9
| Application techniques | Airspray, solvent-based electrostatic |
|---|---|
| Dimensions (mm) | 272 × 74 × 135 |
| Weight (g) | 1.200 |
| Max product pressure (bar) | 8 |
| Max sound pressure level (dB(A)) | 73 |
| Material conductivity | 18,5-123 MΩ.cm |
| Material conductivity lowr | 6,2-123 MΩ.cm |
| Nozzle size (mm) | 0,3 - 2 |
| Operating temperature | 5-40 °C |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Protect against rust and finish railings, structures and metal roofing.
Connect blow guns, couplings and tools to the compressor line for blowing, inflating and working.
For safety
Protect the airways from dust, fumes, gases and vapours during work.
Protect the body and clothing from dust, splashes and dirt; disposable after use.





