Thin paints and enamels, clean tools and strip old paint.

Airless piston pump Leopard 35-70 Wagner
Key features
- Application techniquesAirless, AirCoat
- Weight (kg)26
- Material outlet connectionM M24x1,5
- Compressed air connectionF G 1/2''
- Inlet air pressure (bar)2,5 - 7,1
- Max product pressure (bar)250
What it is
Airless piston pump Leopard 35-70 Wagner. Key specifications: application techniques Airless, AirCoat, weight (kg) 26, material outlet connection M M24x1,5.
These are spray painting systems and guns: airless pumps, spray guns, pressure pots, two-component systems and powder coating systems.
What it is for
Used for coating wood, metal and masonry surfaces.
How to use it
Prepare and strain the product to the stated viscosity, choose the right tip and set the pressure and flow rate with a test on cardboard. Mask off anything that needs protecting and spray at a constant distance, perpendicular to the surface, with parallel overlapping passes. After use, flush the circuit immediately with the solvent or water suited to the product; work with a vapour or dust mask in a ventilated area.
Where it is used
- Vehicle body repair
- Mechanical engineering industry
Technical data
- Application techniques: Airless, AirCoat
- Weight (kg): 26
- Material outlet connection: M M24x1,5
- Compressed air connection: F G 1/2''
- Inlet air pressure (bar): 2,5 - 7,1
- Max product pressure (bar): 250
- Volumetric flow rate per double stroke (cm³): 70
- Volumetric flow rate per minute (l/min): 4,2
- Max stroke rate (min⁻¹): 60
- Sound pressure level at 6 bar (dB(A)): 74
- Max permitted tilt: 10 °
- Gear ratio 1: 35 :1
- Material pH value: 3,5-9 pH
- Material temperature: 5-80 °C
Who it is for
Designed for vehicle body repairers, metal fabricators and furniture makers.
Related products
- Airless piston pump Leopard 48-110 Wagner
- Airless piston pump Leopard 35-150 Wagner
- Masking tape — from the category Paper Masking Tapes
- Filtering face mask with valve Newtec 740 FFP1 NR D Neri 151131 — from the category Dust and Gas Respirators
- Cleaning thinner 5L Carver — from the category Solvents and Thinners for Paints and Coatings
- Browse the whole category: Misting and Spraying Systems
Before you order
In your request, please state the rated load or flow rate, the connection type and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 14
| Application techniques | Airless, AirCoat |
|---|---|
| Weight (kg) | 26 |
| Material outlet connection | M M24x1,5 |
| Compressed air connection | F G 1/2'' |
| Inlet air pressure (bar) | 2,5 - 7,1 |
| Max product pressure (bar) | 250 |
| Volumetric flow rate per double stroke (cm³) | 70 |
| Volumetric flow rate per minute (l/min) | 4,2 |
| Max stroke rate (min⁻¹) | 60 |
| Sound pressure level at 6 bar (dB(A)) | 74 |
| Max permitted tilt | 10 ° |
| Gear ratio 1 | 35 :1 |
| Material pH value | 3,5-9 pH |
| Material temperature | 5-80 °C |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Protect against rust and finish railings, structures and metal roofing.
Connect blow guns, couplings and tools to the compressor line for blowing, inflating and working.
For safety
Protect the airways from dust, fumes, gases and vapours during work.
Protect the body and clothing from dust, splashes and dirt; disposable after use.





