A.M.E.S. srlConnecting nuts for threaded rods
Complete the fixing when screwed onto bolts, screws and threaded rods.
All A.M.E.S. srl products
Threaded rods, steel, class 4.8
Also known as: threaded bars, studding, all-thread rods
Key features
- Length (mm)1000
- MaterialSteel
- FinishGalvanised
- Diameter (mm)da 3 a 24
- Length (m)1
What it is
Threaded rods, steel, class 4.8. Key specifications: length (mm) 1000, material Steel, finish Galvanised.
Threaded rod is steel rod threaded along its entire length which, with nuts, washers and connectors, is used to make tie rods, hangers and chemical anchor fixings.
What it is for
Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor, for structural fixings, where the fixing is load-bearing and must be calculated and for supporting pipework and ductwork.
How to use it
Cut to length with a hacksaw or angle grinder and clean up the thread with a file or by running a nut over it. Screw it into couplers and connectors or set it in the hole with chemical anchor, then tighten with a nut and washer. Choose the property class and finish, zinc-plated or stainless, according to the load and environment.
Where it is used
- Industrial plant engineering
- Mechanical engineering industry
Technical data
- Length (mm): 1000
- Material: Steel
- Finish: Galvanised
- Diameter (mm): da 3 a 24
- Length (m): 1
Who it is for
Designed for metal fabricators and plumbers.
Related products
- Galvanised threaded rods FIS
- Galvanised threaded rods M6
- Hex nuts, stainless steel A2 — from the category Hex Nuts
- Spring washer — from the category Flat Washers
- Chemical Anchor FIS V 410C — from the category Chemical Anchors
- Browse the whole category: Threaded Rods
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Length (mm) | 1000 |
|---|---|
| Material | Steel |
| Finish | Galvanised |
| Diameter (mm) | da 3 a 24 |
| Length (m) | 1 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerChemical Anchor t-bond
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
A.M.E.S. srlApron washers, stainless steel A2
Spread the load under nuts and screws and stop the fixing coming loose.
A.M.E.S. srlSet of combination spanners art. 42/B9N
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.