A.M.E.S. srlConnecting nuts for threaded rods
Complete the fixing when screwed onto bolts, screws and threaded rods.
All Fischer products
Galvanised threaded rods FIS
Also known as: threaded bars, studding, all-thread rods
Key features
- Finishgalvanised
- Equipment suppliednut and washer
- Available sizesM8x110, M10x110, M12x115
What it is
Galvanised threaded rods FIS. Key specifications: finish galvanised, equipment supplied nut and washer.
Threaded rod is steel rod threaded along its entire length which, with nuts, washers and connectors, is used to make tie rods, hangers and chemical anchor fixings.
What it is for
Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Cut to length with a hacksaw or angle grinder and clean up the thread with a file or by running a nut over it. Screw it into couplers and connectors or set it in the hole with chemical anchor, then tighten with a nut and washer. Choose the property class and finish, zinc-plated or stainless, according to the load and environment.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Finish: galvanised
- Equipment supplied: nut and washer
Who it is for
Designed for formwork carpenters, metal fabricators, plumbers and bricklayers.
Related products
- Galvanised threaded rods M6
- Threaded rods, steel, class 4.8
- Milled nuts — from the category Hex Nuts
- Flat washers, polished brass — from the category Flat Washers
- Mesh plugs — from the category Chemical Anchors
- Browse the whole category: Threaded Rods
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Finish | galvanised |
|---|---|
| Equipment supplied | nut and washer |
| Available sizes | M8x110, M10x110, M12x115 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlChemical Anchor shpro
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
A.M.E.S. srlApron washers, stainless steel A2
Spread the load under nuts and screws and stop the fixing coming loose.
A.M.E.S. srlSet of combination spanners art. 42/B9N
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.