L-shaped rotary hammer SDS-Plus, 3 modes, 30mm, 3.5J, 950W, with AVC, 355mm, DeWalt

What it is

The DeWalt D25333K-QS rotary hammer is an L-shaped SDS-Plus tool with 3 modes and a 950 W motor, fitted with the AVC active vibration control system. With a no-load speed from 0 to 1150 rpm, it offers drilling capacities of up to 30 mm in wood and 13 mm in metal, while the AVC keeps vibration values down to 10.3 m/s² when drilling and 8.4 m/s² when chiselling, improving comfort during prolonged use.

A rotary hammer drills concrete, masonry and stone by combining rotation and percussion, with an SDS-Plus, SDS-Max or compressed-air connection.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Use a detector to make sure there are no cables or pipes at the drilling point. Insert the clean, greased bit until it clicks, set the depth stop and select the operating mode. Drill with the tool held square to the surface using both hands, withdrawing the bit from time to time to clear the dust, and wear safety glasses, a dust mask and hearing protection.

Where it is used

• Building services
• Renovation

Technical data

• Max drilling capacity, metal (mm): 13
• Power supply: Wire type
• Vibration level, drilling: 10,3 m/s²
• No load speed (rpm): 0 - 1150
• Height (mm): 250
• Weight (kg): 3,7
• Max drilling capacity, wood (mm): 30
• Absorbed power (W): 950
• Length (mm): 355
• Vibration level, chiselling: 8,4 m/s²
• Diameter (mm): 30
• Perform and protect: Sì

Who it is for

Designed for demolition operatives, electricians, plumbers and bricklayers.

Related products

• L-shaped rotary hammer SDS-Plus, 3 modes, 30mm, 3.5J, 950W, with AVC, 375mm, DeWalt
• L-shaped rotary hammer SDS-Plus, 3 modes, 30mm, 3.5J, 950W, with AVC D25333K-QS DeWalt
• In-line rotary hammer SDS-Plus 32mm M18 Fuel with ONE-KEY (M18 FHACOD32) Milwaukee — from the category SDS Plus Rotary Hammers and Bits
• SDS-Max hammer drill bit DeWalt DT9420-QZ — from the category SDS Max Drill Bits
• Drop-in Anchor DM M12 x 50, DeWalt DFM2110650 — from the category Heavy-Duty Anchors
• Browse the whole category: Rotary Hammers

Before you order

In your request, please state the dimensions, the length, the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.