Restore degraded concrete without sagging, even on vertical surfaces and overhead.

Preformed glass fibre corner bead Kimitech Corner CRM 33x33, 66x66, 99x99 Kimia
Key features
- ModelKimitech CORNER CRM 33
- Made in Italy100% Italian production
- Mesh size33 x 33 mm
- Zirconium content (Zr)> 16
- Fibre typeFibreglass
- Matrix typeEpoxy resin
What it is
Preformed glass fibre corner bead Kimitech Corner CRM 33x33, 66x66, 99x99 Kimia. Key specifications: model Kimitech CORNER CRM 33, line Kimitech, made in Italy 100% Italian production.
FRP and FRCM structural strengthening is a system of fibre fabrics, meshes and connectors, applied with resins or mortars, that increases the strength of beams, columns and masonry.
What it is for
Used for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Strengthening must be carried out to a design by a qualified engineer. Remove render and deteriorated material, repair the substrate and apply the primer; then apply the first coat of resin or mortar, lay the fabric or mesh taut and free of air bubbles and cover it with the second coat. Insert the connectors into clean holes filled with resin; handle resins and primers with gloves and safety glasses.
Where it is used
- Industrial construction
- Conservation and restoration
- Renovation
Technical data
- Model: Kimitech CORNER CRM 33
- Line: Kimitech
- Made in Italy: 100% Italian production
- Mesh size: 33 x 33 mm
- Zirconium content (Zr): > 16
- Fibre type: Fibreglass
- Matrix type: Epoxy resin
- Fibre density: 2,62 g/cm3
- Percentage of glass fibre by weight: 75%
- Percentage of resin by weight: 25%
- No. of bars per metre: Warp 30, weft 30
- Warp 45 mm²: Weft: 4.5 mm2
- Nominal bar diameter: Warp: 3 mm
- Weft 3 mm: Nominal cross-section of the bars
Who it is for
Designed for formwork carpenters, bricklayers and restorers.
Related products
- Helical bar in stainless steel Kimisteel INOX X-BAR Kimia
- Carbon reinforcement bars Kimitech Tondo CB Kimia
- Fibre-reinforced thixotropic cement mortar Betonfix FB Kimia — from the category Fibre-Reinforced Thixotropic Cement Mortars
- German-type welded stainless steel float with wooden handle, 0.5 mm blade, 804/I 0.5 Pavan — from the category Trowels, Spatulas and Floats
- Two-part vinyl ester resin in cartridges for anchoring Kimitech VINYL CTR Kimia — from the category Chemical Anchors
- Browse the whole category: FRP and FRCM Structural Strengthening Systems
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 38
| Model | Kimitech CORNER CRM 33 |
|---|---|
| Line | Kimitech |
| Made in Italy | 100% Italian production |
| Mesh size | 33 x 33 mm |
| Zirconium content (Zr) | > 16 |
| Fibre type | Fibreglass |
| Matrix type | Epoxy resin |
| Fibre density | 2,62 g/cm3 |
| Percentage of glass fibre by weight | 75% |
| Percentage of resin by weight | 25% |
| No. of bars per metre | Warp 30, weft 30 |
| Warp 45 mm² | Weft: 4.5 mm2 |
| Nominal bar diameter | Warp: 3 mm |
| Weft 3 mm | Nominal cross-section of the bars |
| Warp 707 mm² 5 | Weft: 7.07 mm2 ± 5% |
| Equivalent thickness | Warp: 0.212 mm |
| Weft 0212 mm | Resistant cross-section |
| Warp 212 mm²/m | Weft: 212 mm2/m |
| Characteristic value | Warp: 5.97 kN |
| Weft 619 kn | Warp: 5.18 kN |
| Diode | (characteristic value) |
| Warp 1792 kN/m | Weft: 185.8 kN/m |
| Warp 1555 kN/m | Weft: 159.5 kN/m |
| Freeze-thaw resistance | Residue > 85% |
| Humidity resistance at 1000 and 3000 hours | Residue > 85% |
| Residue 85 | Resistance to alkaline environments at 1000 and 3000 hours |
| Weft 15 | Nominal fibre area |
| Weft 0106 mm | Resistant cross-section |
| Warp 106 mm²/m | Weft: 106 mm2/m |
| Weft 655 kn | Warp: 5.05 kN |
| Warp 883 kN/m | Weft: 98.2 kN/m |
| Warp 758 kN/m | Weft: 84.1 kN/m |
| Weft 10 | Nominal fibre area |
| Weft 0071 mm | Resistant cross-section |
| Warp 707 mm²/m | Weft: 70.7 mm2/m |
| Weft 645 kn | Warp: 5.13 kN |
| Warp 631 kN/m | Weft: 64.5 kN/m |
| Warp 513 kN/m | Weft: 55.3 kN/m |
Technical documents
Manufacturer documents (PDF, opens in a new tab).
Compare with similar models
Technical data declared by the manufacturers. An empty cell means the figure is not declared.
| Feature |
This model
Preformed glass fibre corner bead Kimitech Corner CRM 33x33, 66x66, 99x99 Kimia
|
Preformed rigid structural glass-fibre mesh Kimitech WALLMESH CRM 66x66 Kimia
|
Preformed rigid structural glass-fibre mesh Kimitech WALLMESH CRM 33x33 Kimia
|
Preformed rigid structural glass-fibre mesh Kimitech WALLMESH CRM 99x99 Kimia
|
|---|---|---|---|---|
| Brand | Kimia | Kimia | Kimia | Kimia |
| Mesh size | 33 x 33 mm | 66 x 66 mm | 33 x 33 mm | 99 x 99 mm |
| Zirconium content | > 16 | > 16 | > 16 | > 16 |
| Fibre type | Fibreglass | Fibreglass | Fibreglass | Fibreglass |
| Matrix type | Epoxy resin | Epoxy resin | Epoxy resin | Epoxy resin |
| Fibre density | 2,62 g/cm3 | 2,62 g/cm3 | 2,62 g/cm3 | 2,62 g/cm3 |
| Percentage of glass fibre by weight | 75% | 75% | 75% | 75% |
| No. of bars per metre | Warp 30, weft 30 | Warp 15, weft 15 | Warp 30, weft 30 | Warp 10, weft 10 |
| Characteristic value | Warp: 5.97 kN | Warp: 833 MPa | Warp: 845 MPa | Warp: 893 MPa |
| View product → | View product → | View product → |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Bond metal, plastic and concrete with joints that withstand loads and stresses.
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.









