Skip to content
0 Quotes 0Compare
All Edilchimica products

Solvent-based aluminium protective paint Edilchimica

Key features

  • CompositionAluminium pigments in solvent-based resin solution
  • Product typeOne-component, ready to use
  • Dried film appearanceBright aluminium (after mixing)
  • ViscosityVery fluid
  • Density1,08 kg/dm³
  • Dry residue50% (compliant with VOC regulations from 01.01.2010)
See all 9 specifications

What it is

Solvent-based aluminium protective paint Edilchimica. Key specifications: composition Aluminium pigments in solvent-based resin solution, product type One-component, ready to use, dried film appearance Bright aluminium (after mixing).

Paints for iron and metal are zinc-rich coatings, enamels, micaceous iron oxide finishes and blackening agents that protect against rust and finish railings, structures and metal roofing.

What it is for

Used for waterproofing roofs, terraces and below-ground structures, for roof maintenance and to protect surfaces during works, so they do not have to be redone afterwards.

How to use it

Remove rust with a wire brush or abrasive paper and degrease the metal. Apply the primer or zinc-rich coating if required, then the finish by brush, roller or spray in thin coats. Apply blackening agents to bare metal and rinse as per the label. Protect from rain and humidity until dry.

Where it is used

  • Residential construction
  • Renovation

Technical data

  • Composition: Aluminium pigments in solvent-based resin solution
  • Product type: One-component, ready to use
  • Dried film appearance: Bright aluminium (after mixing)
  • Viscosity: Very fluid
  • Density: 1,08 kg/dm³
  • Dry residue: 50% (compliant with VOC regulations from 01.01.2010)
  • Flash point: Above 41°C
  • Consumption: 150–200 g/m², a single coat
  • Shelf life: 1 year

Who it is for

Designed for waterproofing specialists, building maintenance operatives and construction painters.

Related products

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 9
CompositionAluminium pigments in solvent-based resin solution
Product typeOne-component, ready to use
Dried film appearanceBright aluminium (after mixing)
ViscosityVery fluid
Density1,08 kg/dm³
Dry residue50% (compliant with VOC regulations from 01.01.2010)
Flash pointAbove 41°C
Consumption150–200 g/m², a single coat
Shelf life1 year

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

PanfilmBrush Rubens, Series 308, PanfilmCode rubens-e-8211-serie-308

Apply paints, varnishes and wood stains to walls, wood, metal and radiators.

FerviNon-woven rolls Fervi

Sand and finish wood, walls and metal by hand, even in tight corners.

For safety

NeriGlove 275 RJ Neri 360022Code 360022

Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.