Carry water for irrigating, washing and supplying machines in the garden and on site.

Electric pump RX Pedrollo
Key features
- ProtectionIP68
- CapacityUp to 320 l/min (19.2 m³/h)
- HeadUp to 20.5 m
- Liquid temperatureUp to +50 °C (+90 °C for intermittent duty of up to 3 minutes)
- Solids passageUp to Ø 10 mm
- Maximum operating depthUp to 10 m (with a suitably long power cable)
What it is
Electric pump RX Pedrollo. Key specifications: protection IP68, capacity Up to 320 l/min (19.2 m³/h), head Up to 20.5 m.
A submersible drainage pump is a pump that is immersed to empty flooded excavations, basements, sumps and tanks, handling clear, cloudy or waste water depending on the model.
What it is for
Used for water drainage and for pumping water out of excavations, tanks and sumps.
How to use it
Lower it to the lowest point hanging from its handle on a rope or chain, never by the cable, and stand it on a firm base or a raised support so it does not draw in mud. Connect the delivery hose laid out without kinks and set the float or level sensor for automatic start. Never run it dry, and clean the suction strainer after use.
Where it is used
- Water engineering works
- Civil protection
Technical data
- Protection: IP68
- Capacity: Up to 320 l/min (19.2 m³/h)
- Head: Up to 20.5 m
- Liquid temperature: Up to +50 °C (+90 °C for intermittent duty of up to 3 minutes)
- Solids passage: Up to Ø 10 mm
- Maximum operating depth: Up to 10 m (with a suitably long power cable)
- Minimum emptying level: 14 mm for RX 1-2-3 – 30 mm for RX 4-5
- Motor: 2-pole
- Pump body: Stainless steel AISI 304
- Impeller: Stainless steel AISI 304
- Motor casing: Stainless steel AISI 304
- Drive shaft: Stainless steel AISI 431
Who it is for
Designed for plumbers.
Related products
- Electric pump TOP-FLOOR Pedrollo
- Electric pump DC Pedrollo
- Tricoflex Ultramax hose — from the category Water Hoses and Layflat Hoses
- Round inspection chamber with tap — from the category Inspection Chambers
- Generator G20DO (50 Hz) / GU25DO (60 Hz) Genmac — from the category Portable and Wheeled Generating Sets
- Browse the whole category: Submersible Drainage Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 12
| Protection | IP68 |
|---|---|
| Capacity | Up to 320 l/min (19.2 m³/h) |
| Head | Up to 20.5 m |
| Liquid temperature | Up to +50 °C (+90 °C for intermittent duty of up to 3 minutes) |
| Solids passage | Up to Ø 10 mm |
| Maximum operating depth | Up to 10 m (with a suitably long power cable) |
| Minimum emptying level | 14 mm for RX 1-2-3 – 30 mm for RX 4-5 |
| Motor | 2-pole |
| Pump body | Stainless steel AISI 304 |
| Impeller | Stainless steel AISI 304 |
| Motor casing | Stainless steel AISI 304 |
| Drive shaft | Stainless steel AISI 431 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Clamp hoses, sleeves and cables to secure them to fittings and supports.
Bring power to site tools through protected connections, including outdoors.
Join pipes and components of water systems with threaded joints and reducers.




