Carry water for irrigating, washing and supplying machines in the garden and on site.

Submersible multistage electric pump SP 230 Wortex
Key features
- Engine type2-pole induction electric motor (n=2850 rpm)
- ConfigurationSubmerged in a water bath
- InsulationClass B
- ProtectionIP68
- ServiceContinuous
- Motor outer casingStainless steel AISI 304
What it is
Submersible multistage electric pump SP 230 Wortex. Key specifications: engine type 2-pole induction electric motor (n=2850 rpm), configuration Submerged in a water bath, insulation Class B.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Engine type: 2-pole induction electric motor (n=2850 rpm)
- Configuration: Submerged in a water bath
- Insulation: Class B
- Protection: IP68
- Service: Continuous
- Motor outer casing: Stainless steel AISI 304
- Drive shaft: Stainless steel AISI 304
- Upper support: Cast iron
- Lower support: Cast iron
- Mechanical seal: Ceramic/graphite
- Pump outer casing: Stainless steel AISI 304
- Pump shaft: Stainless steel AISI 304
- Stages and impellers: Stainless steel AISI 304
- Suction/delivery ports: 3″
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Submersible multistage electric pump SP 25 Wortex
- Submersible multistage electric pump SP 18 Wortex
- PrimoFlex flexible hose 1/2", 50m, for irrigation and pressure washers Kärcher — from the category Water Hoses and Layflat Hoses
- Male plugs item 290 - 2"1/2 — from the category Galvanised Pipe Fittings
- Outdoor storage unit for tanks Butti — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 15
| Engine type | 2-pole induction electric motor (n=2850 rpm) |
|---|---|
| Configuration | Submerged in a water bath |
| Insulation | Class B |
| Protection | IP68 |
| Service | Continuous |
| Motor outer casing | Stainless steel AISI 304 |
| Drive shaft | Stainless steel AISI 304 |
| Upper support | Cast iron |
| Lower support | Cast iron |
| Mechanical seal | Ceramic/graphite |
| Pump outer casing | Stainless steel AISI 304 |
| Pump shaft | Stainless steel AISI 304 |
| Stages and impellers | Stainless steel AISI 304 |
| Suction/delivery ports | 3″ |
| Well diameter | 6" (DN 150 mm) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




