FischerMasonry drill bit Pointer U FischerCode 4048962484939
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All Fischer products
Extended fixing SXR Fischer
Key features
- RegulationsETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- Hole diameter (mm)10
- Fastening length (mm)100
- Maximum fixable thickness (mm)18
- Packblister pack
- Quantity (pcs)2
What it is
Extended fixing SXR Fischer. Key specifications: regulations ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR), hole diameter (mm) 10, fastening length (mm) 100.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Regulations: ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- Hole diameter (mm): 10
- Fastening length (mm): 100
- Maximum fixable thickness (mm): 18
- Pack: blister pack
- Quantity (pcs): 2
- Content: 2 SXR x100 long-shank plugs + 2 WH 7x125 angle hooks
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Extended fixing SXR WH Fischer
- Extended fixing N Fischer
- Concrete drill bit SDS Plus II Pointer V Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Pneumatic rock drill PK100 Breaker — from the category Rotary Hammers
- Combination spanner 15 mm Stanley STMT95909-0 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 7
| Regulations | ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR) |
|---|---|
| Hole diameter (mm) | 10 |
| Fastening length (mm) | 100 |
| Maximum fixable thickness (mm) | 18 |
| Pack | blister pack |
| Quantity (pcs) | 2 |
| Content | 2 SXR x100 long-shank plugs + 2 WH 7x125 angle hooks |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
StanleyRotary hammer SDS+ 750W 1.8J (FME500K-QS) Stanley
Drill concrete, masonry and stone by combining rotation and hammer action.
FerviSet of polished chrome combination spanners Fervi 0199Code 0199
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
FischerSDS Plus Installation Adapter RA-SDS (Art. 62420), Fischer
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.