Skip to content
0 Quotes 0Compare
All Pedrollo products

Emergency drainage kit, Plug & Drain, Pedrollo

Code PLUG

Key features

  • CapacityUp to 220 l/min (13.2 m³/h)
  • Head (m)up to 12
  • Liquid temperatureUp to 40°C for TOP – up to 50°C for RX
  • Solids passageUp to Ø 10 mm
  • Maximum operating depthUp to 3 m for TOP – up to 10 m for RX (with a suitably long power cable)
  • Minimum emptying level2m for TOP-FLOOR – 14m for TOP and RX
See all 14 specifications

What it is

Emergency drainage kit, Plug & Drain, Pedrollo. Key specifications: capacity Up to 220 l/min (13.2 m³/h), head (m) up to 12, liquid temperature Up to 40°C for TOP – up to 50°C for RX.

A submersible drainage pump is a pump that is immersed to empty flooded excavations, basements, sumps and tanks, handling clear, cloudy or waste water depending on the model.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower it to the lowest point hanging from its handle on a rope or chain, never by the cable, and stand it on a firm base or a raised support so it does not draw in mud. Connect the delivery hose laid out without kinks and set the float or level sensor for automatic start. Never run it dry, and clean the suction strainer after use.

Where it is used

  • Water engineering works
  • Civil protection

Technical data

  • Capacity: Up to 220 l/min (13.2 m³/h)
  • Head (m): up to 12
  • Liquid temperature: Up to 40°C for TOP – up to 50°C for RX
  • Solids passage: Up to Ø 10 mm
  • Maximum operating depth: Up to 3 m for TOP – up to 10 m for RX (with a suitably long power cable)
  • Minimum emptying level: 2m for TOP-FLOOR – 14m for TOP and RX
  • Motor: 2-pole
  • IP protection rating: IP68
  • Hose: PVC
  • Pump body: Technopolymer (for TOP-FLOOR and TOP); AISI 304 stainless steel (for RX)
  • Impeller: Noryl TM (for TOP-FLOOR and TOP), AISI 304 stainless steel (for RX)
  • Motor casing: Stainless steel AISI 304
  • Shaft: Stainless steel AISI 431
  • Filter box: HDPE

Who it is for

Designed for plumbers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 14
CapacityUp to 220 l/min (13.2 m³/h)
Head (m)up to 12
Liquid temperatureUp to 40°C for TOP – up to 50°C for RX
Solids passageUp to Ø 10 mm
Maximum operating depthUp to 3 m for TOP – up to 10 m for RX (with a suitably long power cable)
Minimum emptying level2m for TOP-FLOOR – 14m for TOP and RX
Motor2-pole
IP protection ratingIP68
HosePVC
Pump bodyTechnopolymer (for TOP-FLOOR and TOP); AISI 304 stainless steel (for RX)
ImpellerNoryl TM (for TOP-FLOOR and TOP), AISI 304 stainless steel (for RX)
Motor casingStainless steel AISI 304
ShaftStainless steel AISI 431
Filter boxHDPE

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

For safety