Carry water for irrigating, washing and supplying machines in the garden and on site.

Multistage submersible electric pump SUB-Inox Wortex
Key features
- Maximum liquid temperature35°C
- Max immersion depth (m)20
- Max sand content40 g/m³
- Max starts/hour30
- Engine type2-pole induction electric motor (n=2850 rpm)
- Motor protectionAutomatic-reset overcurrent protection
What it is
Multistage submersible electric pump SUB-Inox Wortex. Key specifications: maximum liquid temperature 35°C, max immersion depth (m) 20, max sand content 40 g/m³.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Water engineering works
Technical data
- Maximum liquid temperature: 35°C
- Max immersion depth (m): 20
- Max sand content: 40 g/m³
- Max starts/hour: 30
- Engine type: 2-pole induction electric motor (n=2850 rpm)
- Motor protection: Automatic-reset overcurrent protection
- Insulation: Class F
- IP protection rating: IP68
- Pump body: Stainless steel AISI 304
- Grille: Stainless steel AISI 304
- Impeller and diffusers: Stainless steel AISI 304
- Supports: Brass
- Drive shaft: Stainless steel AISI 304
- Mechanical seal: Ceramic/graphite/NBR and silicon/silicon/NBR (double seal)
Who it is for
Designed for plumbers and agricultural workers.
Related products
- Multistage submersible electric pump SUB-Plastic Wortex
- Submersible multistage electric pump ST 60 Wortex
- Coiled hose starter set, 10m, Kärcher — from the category Water Hoses and Layflat Hoses
- Reducing sockets MF art. 246 — from the category Galvanised Pipe Fittings
- Tank with electric pump for diesel transfer DCC 200 Wortex — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 15
| Maximum liquid temperature | 35°C |
|---|---|
| Max immersion depth (m) | 20 |
| Max sand content | 40 g/m³ |
| Max starts/hour | 30 |
| Engine type | 2-pole induction electric motor (n=2850 rpm) |
| Motor protection | Automatic-reset overcurrent protection |
| Insulation | Class F |
| IP protection rating | IP68 |
| Pump body | Stainless steel AISI 304 |
| Grille | Stainless steel AISI 304 |
| Impeller and diffusers | Stainless steel AISI 304 |
| Supports | Brass |
| Drive shaft | Stainless steel AISI 304 |
| Mechanical seal | Ceramic/graphite/NBR and silicon/silicon/NBR (double seal) |
| Regulations and certifications | EN 60335-2-41 (for household use) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




