Skip to content
0 Quotes 0Compare
All Pedrollo products

Electric pump F4-INOX Pedrollo

Code F4-INOX

Key features

  • LidStainless steel AISI 316
  • CapacityUp to 1200 l/min (72 m³/h)
  • HeadUp to 9.3 m
  • Gauge suction heightUp to 7 m
  • Liquid temperatureFrom -10 °C to +90 °C
  • Ambient temperatureFrom -10 °C to +40 °C
See all 13 specifications

What it is

Electric pump F4-INOX Pedrollo. Key specifications: lid Stainless steel AISI 316, capacity Up to 1200 l/min (72 m³/h), head Up to 9.3 m.

A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.

Where it is used

  • Agriculture
  • Building services
  • Water engineering works

Technical data

  • Lid: Stainless steel AISI 316
  • Capacity: Up to 1200 l/min (72 m³/h)
  • Head: Up to 9.3 m
  • Gauge suction height: Up to 7 m
  • Liquid temperature: From -10 °C to +90 °C
  • Ambient temperature: From -10 °C to +40 °C
  • Max pressure in the pump body: 10 bar (PN10)
  • Motor: 4-pole
  • IP protection rating: IP55
  • Pump body: Stainless steel AISI 316
  • Impeller: Stainless steel AISI 316
  • Drive shaft: AISI 316L stainless steel

Who it is for

Designed for plumbers, agricultural workers and heating and plumbing engineers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 13
Item codeF4-INOX
LidStainless steel AISI 316
CapacityUp to 1200 l/min (72 m³/h)
HeadUp to 9.3 m
Gauge suction heightUp to 7 m
Liquid temperatureFrom -10 °C to +90 °C
Ambient temperatureFrom -10 °C to +40 °C
Max pressure in the pump body10 bar (PN10)
Motor4-pole
IP protection ratingIP55
Pump bodyStainless steel AISI 316
ImpellerStainless steel AISI 316
Drive shaftAISI 316L stainless steel

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job