Skip to content
0 Quotes 0Compare
All Pedrollo products

Electric pump F Pedrollo

Code F

Key features

  • CapacityUp to 5750 l/min (345 m³/h)
  • Gauge suction heightUp to 7 m
  • Ambient temperatureFrom -10 °C to +40 °C
  • Motor2-pole
  • Liquid temperatureFrom -10 °C to +90 °C
  • Max pressure in the pump body10 bar (PN10)
See all 12 specifications

What it is

Electric pump F Pedrollo. Key specifications: capacity Up to 5750 l/min (345 m³/h), gauge suction height Up to 7 m, ambient temperature From -10 °C to +40 °C.

A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.

Where it is used

  • Agriculture
  • Building services
  • Water engineering works

Technical data

  • Capacity: Up to 5750 l/min (345 m³/h)
  • Gauge suction height: Up to 7 m
  • Ambient temperature: From -10 °C to +40 °C
  • Motor: 2-pole
  • Liquid temperature: From -10 °C to +90 °C
  • Max pressure in the pump body: 10 bar (PN10)
  • IP protection rating: IP55
  • Head: Up to 98 m
  • Pump body: Cast iron
  • Impeller: Cast iron or brass depending on the model
  • Shaft: Stainless steel AISI 431
  • Housing: Cast iron

Who it is for

Designed for plumbers, agricultural workers and heating and plumbing engineers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 12
CapacityUp to 5750 l/min (345 m³/h)
Gauge suction heightUp to 7 m
Ambient temperatureFrom -10 °C to +40 °C
Motor2-pole
Liquid temperatureFrom -10 °C to +90 °C
Max pressure in the pump body10 bar (PN10)
IP protection ratingIP55
HeadUp to 98 m
Pump bodyCast iron
ImpellerCast iron or brass depending on the model
ShaftStainless steel AISI 431
HousingCast iron

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlBrass T-connector art. 296

Join pipes and components of water systems with threaded joints and reducers.