A.M.E.S. srlHose with galvanised steel spiral
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Electric pump PK Pedrollo
Key features
- CapacityUp to 90 l/min (5.4 m³/h)
- Head (m)up to 100
- Gauge suction height (m)up to 8
- Liquid temperatureFrom -10 °C to +60 °C
- Ambient temperatureUp to +40 °C
- Max pressure in the pump body6 bar for PK 65 – 7 bar for PK 80 – 10 bar for PK 90, PK 100, PK 200, PK 300
What it is
PK (code PK) is a Pedrollo electric pump — electric pumps with peripheral impeller, with flow rate up to 90 l/min (5.4 m³/h), head up to 100 m, manometric suction lift up to 8 m. Professional product, reliable for intensive use.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 90 l/min (5.4 m³/h)
- Head (m): up to 100
- Gauge suction height (m): up to 8
- Liquid temperature: From -10 °C to +60 °C
- Ambient temperature: Up to +40 °C
- Max pressure in the pump body: 6 bar for PK 65 – 7 bar for PK 80 – 10 bar for PK 90, PK 100, PK 200, PK 300
- Motor: 2-pole
- IP protection rating: IPX4
- Pump body: Cast iron
- Impeller: Brass
- Shaft: Stainless steel AISI 430F
- Lantern: Aluminium with brass lid
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump PKm 60 Pedrollo
- Electric pump NK Pedrollo
- Trough water pipe — from the category Water Hoses and Layflat Hoses
- FF hose fittings, flat seat, art. 330 — from the category Galvanised Pipe Fittings
- One-piece underground tanks, smooth Panettone, polyethylene, Rototec — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 12
| Capacity | Up to 90 l/min (5.4 m³/h) |
|---|---|
| Head (m) | up to 100 |
| Gauge suction height (m) | up to 8 |
| Liquid temperature | From -10 °C to +60 °C |
| Ambient temperature | Up to +40 °C |
| Max pressure in the pump body | 6 bar for PK 65 – 7 bar for PK 80 – 10 bar for PK 90, PK 100, PK 200, PK 300 |
| Motor | 2-pole |
| IP protection rating | IPX4 |
| Pump body | Cast iron |
| Impeller | Brass |
| Shaft | Stainless steel AISI 430F |
| Lantern | Aluminium with brass lid |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PedrolloElectronic pressure regulator EASYPRESS PedrolloCode EASYPRESS
Connect and fit out pumps, tanks and cisterns so that the water system works.
A.M.E.S. srlBrass socket art. 297
Join pipes and components of water systems with threaded joints and reducers.
PedrolloThree-phase control panel for electric pumps QES PedrolloCode QES
Distribute power on site and protect people and tools from overloads and earth leakage.