Skip to content
0 Quotes 0Compare
All Pedrollo products

Electric pump 2CP Pedrollo

Code 2CP

Key features

  • CapacityUp to 450 l/min (27 m³/h)
  • Head (m)up to 112
  • Gauge suction height (m)up to 7
  • Liquid temperatureFrom -10 °C to +90 °C
  • Ambient temperatureFrom -10 °C to +40 °C
  • Max pressure in the pump body (bar)10
See all 13 specifications

What it is

2CP (code 2CP) is a Pedrollo electric pump — twin-impeller centrifugal electric pumps, with a flow rate of up to 450 l/min (27 m³/h), head of up to 112 m, manometric suction height of up to 7 m. Professional product, reliable for intensive use.

A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.

Where it is used

  • Agriculture
  • Building services
  • Water engineering works

Technical data

  • Capacity: Up to 450 l/min (27 m³/h)
  • Head (m): up to 112
  • Gauge suction height (m): up to 7
  • Liquid temperature: From -10 °C to +90 °C
  • Ambient temperature: From -10 °C to +40 °C
  • Max pressure in the pump body (bar): 10
  • Motor: 2-pole
  • IP protection rating: IPX4
  • Suction body: Cast iron
  • Discharge body: Cast iron
  • Impellers: Brass
  • Shaft: Stainless steel AISI 431

Who it is for

Designed for plumbers, agricultural workers and heating and plumbing engineers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 13
Item code2CP
CapacityUp to 450 l/min (27 m³/h)
Head (m)up to 112
Gauge suction height (m)up to 7
Liquid temperatureFrom -10 °C to +90 °C
Ambient temperatureFrom -10 °C to +40 °C
Max pressure in the pump body (bar)10
Motor2-pole
IP protection ratingIPX4
Suction bodyCast iron
Discharge bodyCast iron
ImpellersBrass
ShaftStainless steel AISI 431

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlNon-toxic coiled hose

Carry water for irrigating, washing and supplying machines in the garden and on site.