Fix to the roof the points where lifelines and fall protection devices are attached.

Counter-plate for rigid anchor posts CSC Edilizia 417A
Key features
- MaterialS235JR (Fe 360 B)
- RegulationsUNI-ISO 2768
- Slots2 slots 18x36 mm
- Weight (kg)1,11
What it is
The backing plate for non-deformable anchors CSC Edilizia 417A is a reinforcement component for lifeline systems, designed to accompany non-deformable anchors in distributing loads onto the structural substrate. It is made of S235JR steel (Fe 360 B) to the general tolerances of UNI-ISO 2768, weighs 1.11 kg, and has two 18x36 mm slots that allow it to be coupled and fixed.
The backing plate is the plate placed on the opposite side of the structure from the base or anchor, to spread the load when the through bolts are tightened.
What it is for
Used as an anchor point in fall protection systems, for work at height, where access and restraint must be ensured for the whole job and for fall protection, as part of a fall arrest or work restraint system.
How to use it
Position it on the opposite side of the fixing point and tighten it with the screws provided to the stated torque. Check that it sits snugly against the structure.
Where it is used
- Industrial construction
- Workplace safety and PPE
Technical data
- Material: S235JR (Fe 360 B)
- Regulations: UNI-ISO 2768
- Slots: 2 slots 18x36 mm
- Weight (kg): 1,11
Who it is for
Designed for formwork carpenters, building maintenance operatives and health and safety officers.
Related products
- Counter-plate for wide base CSC Edilizia
- Counter-plate for rigid anchor posts CSC Edilizia 417
- Type A – C Anchor, CSC Edilizia — from the category Horizontal and Vertical Lifeline Anchors
- Harness Wind 1 Pro Irudek — from the category Fall Arrest Harnesses
- Double lanyard with sheath and absorber Portwest FP55 — from the category Lanyards and Energy Absorbers
- Browse the whole category: Lifeline Accessories
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 4
| Material | S235JR (Fe 360 B) |
|---|---|
| Regulations | UNI-ISO 2768 |
| Slots | 2 slots 18x36 mm |
| Weight (kg) | 1,11 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect the harness to the anchor and absorb the jolt in the event of a fall from height.
Connect harnesses, lanyards and anchors to protect against falls when working at height.
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
For safety
Protect against falls from height by supporting the body during work at height.





