0 Quotes 0Compare
0 Compare 0 Quotes
Tutti gli argomenti
Blog AMES

Guides

469 articoli pubblicati

How to choose a site marker: felt-tip pen, pencil or sprayCarpenter's pencil for wood, permanent marker for metal and masonry, marking spray for lines on the ground. The tip (... Car care products: how to choose waxes and cleanersTo wash and protect a vehicle, choose the cleaner for the dirt, the wax for protection and the pack size for how many... How to choose interior door handles: lock drilling, spindle and backplateBefore choosing handles and backplates for a door, check the lock drilling (standard key, WC or Yale cylinder), the s... How to choose furniture handles and knobs: hole centres and sizeTo change the handles or knobs on a piece of furniture, measure the hole centres (64, 96, 128 mm...) and choose the m... How to choose abrasive sleeves and rolls: grit and speedAbrasive sleeves and rolls rough down or finish: the grit decides how much they remove, the maximum speed (rpm) how h... How to choose a spade, shovel or pick: material, blade and handleSpade for digging and shovelling aggregates, shovel for snow and light materials, pick for hard ground. Choose accord... How to choose a fibre-reinforced thixotropic mortar: R3 or R4?To repair deteriorated concrete on vertical or overhead surfaces you need a fibre-reinforced thixotropic mortar. Choo... How to choose mortar: cement-based, lime-based or epoxyMortar is chosen for the job: concrete repair, plaster, masonry, screed or injection. Look at the standard on the pro... How to choose a floor grinder: weight and powerTo grind and polish concrete, marble and stone, what matters is the weight of the machine (from 23 to 140 kg), the po... How to choose scrubber-dryers and industrial vacuum cleaners: the criteriaLarge floors need a scrubber-dryer; dust and debris need a professional vacuum cleaner. What matters is the power sup... How to choose plate compactors and core drills for the construction siteTo compact soil and sub-bases, choose a plate compactor or a rammer according to centrifugal force (12-22 kN in the c... How to choose a bench lathe or milling machine: size and motorOn a lathe, what counts is the distance between centres, the diameter that passes over the bed and the motor (230 V s... How to choose sweepers and sprayers: width and tankFor yards and industrial units, what counts is the sweeper's working width (here from 480 to 1350 mm) and the drive t...

Altri argomenti