Carry water for irrigating, washing and supplying machines in the garden and on site.

Electric pump 3SR Pedrollo
Key features
- ProtectionIP68
- Drive shaftAISI 304 stainless steel
- LanternsCast AISI 304 stainless steel
- CapacityUp to 120 l/min (7.2 m³/h)
- HeadUp to 267 m
- Liquid temperatureUp to +40 °C
What it is
Electric pump 3SR Pedrollo. Key specifications: protection IP68, drive shaft AISI 304 stainless steel, lanterns Cast AISI 304 stainless steel.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Protection: IP68
- Drive shaft: AISI 304 stainless steel
- Lanterns: Cast AISI 304 stainless steel
- Capacity: Up to 120 l/min (7.2 m³/h)
- Head: Up to 267 m
- Liquid temperature: Up to +40 °C
- Maximum sand content: 150 g/m³
- Operating depth below water level (m): 70
- Motor: 2-pole
- Delivery casing: Stainless steel AISI 304
- Outer casing: Stainless steel AISI 304
- Impellers: Derlin® for 3SR 1-2-4 – Noryl™ for 3SR 5
- Diffusers: Noryl™
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump 6HR Pedrollo
- Electric pump 2CP Pedrollo
- PrimoFlex Premium hose 5/8" – 25m Kärcher — from the category Water Hoses and Layflat Hoses
- Union fitting MF flat seat art. 331 - 1'1/2 — from the category Galvanised Pipe Fittings
- Transportable diesel tank in polyethylene (ADR exempt) Rototec — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 14
| Item code | 3SR |
|---|---|
| Protection | IP68 |
| Drive shaft | AISI 304 stainless steel |
| Lanterns | Cast AISI 304 stainless steel |
| Capacity | Up to 120 l/min (7.2 m³/h) |
| Head | Up to 267 m |
| Liquid temperature | Up to +40 °C |
| Maximum sand content | 150 g/m³ |
| Operating depth below water level (m) | 70 |
| Motor | 2-pole |
| Delivery casing | Stainless steel AISI 304 |
| Outer casing | Stainless steel AISI 304 |
| Impellers | Derlin® for 3SR 1-2-4 – Noryl™ for 3SR 5 |
| Diffusers | Noryl™ |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




