A.M.E.S. srlNon-toxic coiled hose
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Submersible pump DAVIS Pedrollo
Also known as: submersible pump
Key features
- CapacityUp to 50 l/min (3.0 m³/h)
- Motor2-pole
- Outer casingStainless steel AISI 304
- HeadUp to 75 m
- Liquid temperatureUp to +40 °C
- Maximum operating depth (m)40
What it is
Submersible pump DAVIS Pedrollo. Key specifications: capacity Up to 50 l/min (3.0 m³/h), motor 2-pole, outer casing Stainless steel AISI 304.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 50 l/min (3.0 m³/h)
- Motor: 2-pole
- Outer casing: Stainless steel AISI 304
- Head: Up to 75 m
- Liquid temperature: Up to +40 °C
- Maximum operating depth (m): 40
- IP protection rating: IP68
- Delivery casing: Cast iron
- Impeller: Brass
- Seal cover: Cast iron
- Shaft: Stainless steel AISI 431
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Submersible well pump 3SR Pedrollo
- Pressurisation unit with inverter TISSEL 100 Pedrollo
- Extendable watering hose — from the category Water Hoses and Layflat Hoses
- Reduced double screws art. 245 — from the category Galvanised Pipe Fittings
- Outdoor storage unit for drums Butti — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 11
| Capacity | Up to 50 l/min (3.0 m³/h) |
|---|---|
| Motor | 2-pole |
| Outer casing | Stainless steel AISI 304 |
| Head | Up to 75 m |
| Liquid temperature | Up to +40 °C |
| Maximum operating depth (m) | 40 |
| IP protection rating | IP68 |
| Delivery casing | Cast iron |
| Impeller | Brass |
| Seal cover | Cast iron |
| Shaft | Stainless steel AISI 431 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PedrolloPressure regulator Presflo Vario PedrolloCode PRESFLO
Connect and fit out pumps, tanks and cisterns so that the water system works.
A.M.E.S. srlBrass T-connector art. 296
Join pipes and components of water systems with threaded joints and reducers.
PedrolloControl panel for electric pumps E1 - E2 PedrolloCode E1
Distribute power on site and protect people and tools from overloads and earth leakage.