A.M.E.S. srlHose with galvanised steel spiral
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Electric pump UP Pedrollo
Key features
- CapacityUp to 180 l/min (10.8 m³/h)
- Motor2-pole
- Outer casingStainless steel AISI 304
- HeadUp to 97 m
- Maximum operating depthUp to 20 m (with a suitably long power cable)
- Liquid temperatureUp to +40 °C
What it is
Electric pump UP Pedrollo. Key specifications: capacity Up to 180 l/min (10.8 m³/h), motor 2-pole, outer casing Stainless steel AISI 304.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 180 l/min (10.8 m³/h)
- Motor: 2-pole
- Outer casing: Stainless steel AISI 304
- Head: Up to 97 m
- Maximum operating depth: Up to 20 m (with a suitably long power cable)
- Liquid temperature: Up to +40 °C
- Maximum sand content: 150 g/m³
- IP protection rating: IP68
- Discharge body: Stainless steel AISI 304
- Impeller: Noryl™
- Diffuser: Noryl™
- Shaft: Stainless steel AISI 431
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump VSP Pedrollo
- Electric pump TURBO Pedrollo
- Set of 1/2'' flexible hoses with hose reel Kärcher — from the category Water Hoses and Layflat Hoses
- Union fitting MF flat seat art. 331 - 1'1/2 — from the category Galvanised Pipe Fittings
- Fuel Tank Accessory Tekcnoplast — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 12
| Capacity | Up to 180 l/min (10.8 m³/h) |
|---|---|
| Motor | 2-pole |
| Outer casing | Stainless steel AISI 304 |
| Head | Up to 97 m |
| Maximum operating depth | Up to 20 m (with a suitably long power cable) |
| Liquid temperature | Up to +40 °C |
| Maximum sand content | 150 g/m³ |
| IP protection rating | IP68 |
| Discharge body | Stainless steel AISI 304 |
| Impeller | Noryl™ |
| Diffuser | Noryl™ |
| Shaft | Stainless steel AISI 431 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PedrolloElectronic pressure regulator STEADYPRES PedrolloCode STEADYPRES
Connect and fit out pumps, tanks and cisterns so that the water system works.
A.M.E.S. srlBrass socket art. 297
Join pipes and components of water systems with threaded joints and reducers.
PedrolloThree-phase control panel for electric pumps QET PedrolloCode QET
Distribute power on site and protect people and tools from overloads and earth leakage.