Strip nailer 33° DeWalt DPN9033SM-XJ

What it is

The DeWalt DPN9033SM-XJ is a pneumatic stick nailer with a magazine angled at 33 degrees, using nails of 2.5 to 3.3 mm diameter in lengths from 50 to 90 mm and a magazine capacity of 50 pieces. It operates in sequential mode and has a weight of 3.5 kg, a width of 133 mm and a height of 355 mm, with the angled magazine making it easier to reach into tight spaces.

The stapler or nailer is a tool, manual, pneumatic, electric, cordless, gas-powered or powder-actuated, that drives staples or nails to fasten wood, panels, insulation and fabrics; the gas or powder-actuated versions also fasten into steel and concrete.

What it is for

Used for nailing battens, formwork and timber structures and for fixing into timber, from assembly work to carpentry.

How to use it

Load staples or nails of the type and length specified for the tool; gas or powder-actuated models also use the gas cell or the specified charge. Rest the nose perpendicular to the workpiece, press until it is seated and fire; on pneumatic models, set the air pressure first. Never point it at people, disconnect the air or battery and remove the charge before clearing a jam. Wear safety glasses and, with powder-actuated models, ear protection as well.

Where it is used

• Residential construction
• Renovation

Technical data

• Width (mm): 133
• Magazine angle: 33
• Nail diameter (mm): 2,5 - 3,3
• Weight (kg): 3,5
• Height (mm): 355
• Magazine capacity: 50
• Vibration uncertainty K1: 1,5
• Power supply: Pneumatic
• Nail length (mm): 50 - 90
• Firing mode: Sequential
• Loading type: Stick

Who it is for

Designed for formwork carpenters and joiners.

Related products

• Nailer, C5 Trak-It Kit - short magazine, DeWalt DDF5120550
• Compact coil nailer DeWalt DPN75C-XJ
• Type "7" staples (1-CT109T) Stanley — from the category Staples
• Gas cylinder C3 Trak-It DeWalt DDF5330000 — from the category Staples, Collated Nails, Powder Loads and Accessories
• Compressor, 10 litres, oil-free, 18V Brushless, DeWalt — from the category Small Compressors – 6 to 24 Litres
• Browse the whole category: Staplers and Nailers

Before you order

In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.