Carry water for irrigating, washing and supplying machines in the garden and on site.

Surface electric pump MULTI VG 40/80 Wortex
Key features
- Multi vg 40Single-phase
- Multi vgt 40Three-phase
- Multi vg 50Single-phase
- Multi vgt 50Three-phase
- Multi vg 60Single-phase
- Multi vgt 60Three-phase
What it is
Surface electric pump MULTI VG 40/80 Wortex. Key specifications: multi vg 40 Single-phase, multi vgt 40 Three-phase, multi vg 50 Single-phase.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Multi vg 40: Single-phase
- Multi vgt 40: Three-phase
- Multi vg 50: Single-phase
- Multi vgt 50: Three-phase
- Multi vg 60: Single-phase
- Multi vgt 60: Three-phase
- Multi vgt 80: Three-phase
- Motor: Induction, 2-pole (2850 rpm)
- Insulation: Class F
- Protection: IP55
- Pump body: Cast iron
- Impeller/diffuser: Noryl
- Pump casing: Stainless steel AISI 304
- Drive shaft: Stainless steel AISI 304
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Surface electric pump MULTI VX 10 Wortex
- Surface electric pump MULTI VG 3/5 Wortex
- Drip irrigation capillary hose, 25m, Kärcher — from the category Water Hoses and Layflat Hoses
- Reduced double screws art. 245 — from the category Galvanised Pipe Fittings
- Diesel tank Tekcnoplast — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 19
| Multi vg 40 | Single-phase |
|---|---|
| Multi vgt 40 | Three-phase |
| Multi vg 50 | Single-phase |
| Multi vgt 50 | Three-phase |
| Multi vg 60 | Single-phase |
| Multi vgt 60 | Three-phase |
| Multi vgt 80 | Three-phase |
| Motor | Induction, 2-pole (2850 rpm) |
| Insulation | Class F |
| Protection | IP55 |
| Pump body | Cast iron |
| Impeller/diffuser | Noryl |
| Pump casing | Stainless steel AISI 304 |
| Drive shaft | Stainless steel AISI 304 |
| Mechanical seals | Silicon/silicon/NBR |
| Maximum liquid temperature | 35°C |
| Maximum ambient temperature | 40°C |
| Suction height | 7 m head |
| Service | Continuous |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




