Connect the harness to the anchor and absorb the jolt in the event of a fall from height.

Webbing or cable anchor loops CTA01 / CTA02 / CTA14 Irudek
Key features
- StandardEN 795 B
- Resistance (kN)22
- CTA01webbing with 2 steel rings, length 1.2 / 3 / 5 m, weight 0.3 / 0.4 / 0.5 kg
- CTA02polyester webbing with 2 steel rings and abrasion protection, length 1.5 m, weight 550 g
- CTA14stainless steel cable Ø 8 mm with steel thimble, length 2 m, weight 625 g
What it is
Webbing or cable anchor loops CTA01 / CTA02 / CTA14 Irudek. Key specifications: standard EN 795 B, resistance (kN) 22, CTA01 webbing with 2 steel rings, length 1.2 / 3 / 5 m, weight 0.3 / 0.4 / 0.5 kg.
A fall protection anchor is the fixed point, permanent or mobile, to which the worker's fall arrest or rope access system is connected.
What it is for
Used as an anchor point in fall protection systems and for work at height, where access and restraint must be ensured for the whole job.
How to use it
Choose the type according to the substrate (concrete, rock, steel, beam, vehicle) and install it following the manufacturer's instructions, using the specified fixings. Check its condition before use and connect with a connector, preferably above the worker's head. Take into account the fall clearance below the work position; an anchor that has arrested a fall must be taken out of service.
Where it is used
- Industrial construction
- Workplace safety and PPE
Technical data
- Standard: EN 795 B
- Resistance (kN): 22
- CTA01: webbing with 2 steel rings, length 1.2 / 3 / 5 m, weight 0.3 / 0.4 / 0.5 kg
- CTA14: stainless steel cable Ø 8 mm with steel thimble, length 2 m, weight 625 g
Who it is for
Designed for formwork carpenters, building maintenance operatives, arborists and health and safety officers.
Related products
- Insulating telescopic pole 30 kV PERT30KV Irudek
- Anchor Wall Mount Base, Irudek
- Harness Wind 1 Irudek — from the category Fall Arrest Harnesses
- Connector STEELSAFE 952 Irudek — from the category Safety Karabiners
- Fall-arrest lanyard with energy absorber FR4 Irudek — from the category Lanyards and Energy Absorbers
- Browse the whole category: Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 5
| Standard | EN 795 B |
|---|---|
| Resistance (kN) | 22 |
| CTA01 | webbing with 2 steel rings, length 1.2 / 3 / 5 m, weight 0.3 / 0.4 / 0.5 kg |
| CTA02 | polyester webbing with 2 steel rings and abrasion protection, length 1.5 m, weight 550 g |
| CTA14 | stainless steel cable Ø 8 mm with steel thimble, length 2 m, weight 625 g |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect harnesses, lanyards and anchors to protect against falls when working at height.
Connect harness, lanyards and anchors in systems that protect against falls from height.
For safety
Protect against falls from height by supporting the body during work at height.
Follow the operator's movements and lock instantly to protect against falls from height.





