Thin paints and enamels, clean tools and strip old paint.

Heated hose with control Dino Power DP-637EHP
Key features
- Voltage (V)220
- Power (W)1200
- Pressure70 MPa
- Length (m)15
- Temperatureup to 150 °C
- ModelDP-637EHP
What it is
The Dino Power DP-637EHP heated hose with controller is an accessory for high-pressure airless systems, equipped with a heating system managed by a dedicated controller. It operates at 220 V with a power of 1200 W, withstands a pressure of up to 70 MPa and has a length of 15 m with a G1/2 connection, able to operate at temperatures of up to -150 °C.
The high-pressure fluid hose connects the pump to the gun and carries the paint; for electrostatic painting it is also available in a conductive version.
What it is for
Used for tool maintenance, keeping tools sharp and efficient, for painting interiors and exteriors and for coating wood, metal and masonry surfaces.
How to use it
Choose a hose with a maximum pressure and diameter suited to the pump. Screw it onto the fittings without twisting it, avoiding tight bends and crushing. Release the pressure from the system before disconnecting it. Replace it if the sheath is cracked, swollen or damaged.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Voltage (V): 220
- Power (W): 1200
- Pressure: 70 MPa
- Length (m): 15
- Temperature: up to 150 °C
- Model: DP-637EHP
- Max pressure: 70MPa
- Diameter: G1/2 (internal diameters 6/8/10/12mm available)
- Heating time: Heats up in one minute
- Temperature range: Normal temperature – adjustable up to 150°C
Who it is for
Designed for decorative finishers, painters and decorators and construction painters.
Related products
- Shut-off and spray vent valve DP-637SCS Dino Power
- Conductive fluid hose Dino Power MH-7503C
- Masking paper with adhesive tape, 20 m roll — from the category Paper Masking Tapes
- Filter for New Mask II half mask Newtec 94 B1 Neri 151202 — from the category Dust and Gas Respirators
- Anti-blush nitro thinner Colorificio Adriatico — from the category Solvents and Thinners for Paints and Coatings
- Browse the whole category: Misting and Spraying Systems
Before you order
In your request, please state the length, the diameter, the supply voltage and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 11
| Item code | DP-637EHP |
|---|---|
| Voltage (V) | 220 |
| Power (W) | 1200 |
| Pressure | 70 MPa |
| Length (m) | 15 |
| Temperature | up to 150 °C |
| Model | DP-637EHP |
| Max pressure | 70MPa |
| Diameter | G1/2 (internal diameters 6/8/10/12mm available) |
| Heating time | Heats up in one minute |
| Temperature range | Normal temperature – adjustable up to 150°C |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Colour and protect interior and exterior walls and the building's other surfaces.
Shield floors, furniture and surfaces from paint, dust and knocks during works.
For safety
Protect the airways from dust, fumes, gases and vapours during work.
Protect the body and clothing from dust, splashes and dirt; disposable after use.





