FischerConcrete anchor UltraCut FBS II 6 M8/19-M10/21-M8/M10 Fis...Code 4048962329537
Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.
All Fischer products
Heavy-duty collar FMFSC Fischer
Also known as: heavy-duty pipe clamp
Key features
- Locking screwM10
- Nominal size1 in
- Clamping range D (mm)34
- Width B (mm)102
- Width x thickness, collar band30 x 5 mm
- Tightening torque Tinst30 N·m
What it is
The Fischer FMFSC heavy-duty clamp is a pipe support designed for high loads, with a nominal size of 1 inch, a clamping range of 34 mm and a width of 102 mm. The clamp band measures 30 x 5 mm, while the M10 locking screw and the installation tightening torque of 30 N·m ensure a robust anchoring of the pipes.
A pipe clip is a metal or plastic band, often with a rubber insert, that wraps around a pipe and fixes it to a wall, a ceiling or a rail with a screw, wall plug or threaded rod. Light, heavy-duty, noise- and heat-insulating versions are available, as well as versions for downpipes and flues.
What it is for
Used for installing building services and plant and for supporting pipework and ductwork.
How to use it
Choose a clip with the diameter of the pipe and the right load rating. Fix it to the support with the right anchor, insert the pipe and tighten the screw until it holds the pipe without crushing it. Versions with a rubber insert dampen vibration and noise. On lines that expand with temperature, leave the movement free on the sliding clips and lock the pipe only at the fixed points.
Where it is used
- Industrial construction
- Building services
- Industrial plant engineering
Technical data
- Locking screw: M10
- Nominal size: 1 in
- Clamping range D (mm): 34
- Width B (mm): 102
- Width x thickness, collar band: 30 x 5 mm
- Tightening torque Tinst: 30 N·m
- Thread: M10
Who it is for
Designed for plumbers, industrial maintenance technicians, HVAC technicians and heating and plumbing engineers.
Related products
- Heavy-duty pipe collar CPS-V Fischer
- Collar for copper pipe Fischer
- FBN II K HDG anchors (short version, hot-dip galvanised) Fischer — from the category Heavy-Duty Anchors
- Threaded rod by the metre, class 4.6/4.8, Fischer — from the category Threaded Rods
- Multi-cone bars FHB II-A S and capsules FHB II-P/PF, Fischer — from the category Chemical Anchors
- Browse the whole category: Wall Brackets for Carpentry
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 7
| Locking screw | M10 |
|---|---|
| Nominal size | 1 in |
| Clamping range D (mm) | 34 |
| Width B (mm) | 102 |
| Width x thickness, collar band | 30 x 5 mm |
| Tightening torque Tinst | 30 N·m |
| Thread | M10 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerThreaded rod by the metre, class 4.6/4.8, Fischer
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
FischerHammer-head nut FCN Clix S FischerCode 4048962479331
Complete the fixing when screwed onto bolts, screws and threaded rods.
FischerConcrete drill bit SDS Plus II Pointer V FischerCode 4048962211764
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.