Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.

Natural hydraulic lime grout for bonding frescoed plasters Tectoria AFFRESCO Kimia
Key features
- ModelTectoria AFFRESCO
- LineTectoria
- RegulationsEN 459
- Made in Italy100% Italian production
- AppearancePowder product
- ColourWhite
What it is
Kimia Tectoria AFFRESCO injection grout, made of pure natural hydraulic lime NHL 3.5 conforming to UNI EN 459, without cement. It is very fluid, with a low water/binder ratio and a maximum aggregate size of 0.1 mm, so it also enters minimal cracks and voids. The content of water-soluble salts is below 0.07% and at 28 days the flexural strength exceeds 1.2 MPa. It comes as a white powder.
Grout is a very fluid mix of binder and water, sometimes with very fine aggregates, injected into voids and cracks in masonry to consolidate it.
What it is for
Used for strengthening masonry and concrete structures and for structural and assembly bonding.
How to use it
Clean the crack and saturate it with water, then set up the injection points. Mix with the stated amount of water at low speed to a lump-free mix, and inject at low pressure starting from the bottom. Wash tools immediately.
Where it is used
- Conservation and restoration
- Renovation
Technical data
- Model: Tectoria AFFRESCO
- Line: Tectoria
- Regulations: EN 459
- Made in Italy: 100% Italian production
- Appearance: Powder product
- Colour: White
- PH in aqueous dispersion: 11,5 - 12,5
- Max aggregate size UNI EN 10151 (mm): 0,1
- Flowability EN 445, Marsh cone: Initial < 25 sec.
- Flexural strength at 7 days, UNI EN 101511: > 1 MPa
- Flexural strength at 28 days, UNI EN 101511: > 1.2 MPa
- Water soluble salt content, standard 1383: < 0,07 %
Who it is for
Designed for bricklayers, restorers and plasterers.
Related products
- Natural hydraulic lime grout for consolidation injection in rubble-filled masonry, Basic INIEZIONE, Kimia
- Pourable micro-concrete for consolidation Betonfix CR Kimia
- Double-helix epoxy mixing paddle, hexagonal shaft, Rubi — from the category Mixers
- US-type welded float, serrated on 4 sides, plastic handle, 816/SD-4L Pavan — from the category Trowels, Spatulas and Floats
- Rubber Bucket 'Rubtray' No. 3 (28 L) Rubi — from the category Buckets, Tubs and Mortar Buckets
- Browse the whole category: Cement and Lime Mortars
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 12
| Model | Tectoria AFFRESCO |
|---|---|
| Line | Tectoria |
| Regulations | EN 459 |
| Made in Italy | 100% Italian production |
| Appearance | Powder product |
| Colour | White |
| PH in aqueous dispersion | 11,5 - 12,5 |
| Max aggregate size UNI EN 10151 (mm) | 0,1 |
| Flowability EN 445, Marsh cone | Initial < 25 sec. |
| Flexural strength at 7 days, UNI EN 101511 | > 1 MPa |
| Flexural strength at 28 days, UNI EN 101511 | > 1.2 MPa |
| Water-soluble salt content, standard 1383 | < 0,07 % |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Mix mortars, adhesives, paints and resins directly in the bucket with the paddle.
Hold and carry mortars, adhesives and water for mixing and dosing on site.
Mix mortars, renders, screeds, adhesives and pre-mixed products evenly.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





