Skip to content
0 Quotes 0Compare
All Pedrollo products

Submersible pump ZXm 2-GM Pedrollo

Also known as: submersible pump

Code ZXm

Key features

  • CapacityUp to 400 l/min (24 m³/h)
  • Motor2-pole
  • Motor casingStainless steel AISI 304
  • HeadUp to 13 m
  • Liquid temperatureUp to +40 °C
  • Solids passageUp to Ø 30 mm for ZXm 2/30-GM – up to Ø 40 mm for ZXm 2/40-GM
See all 12 specifications

What it is

Submersible pump ZXm 2-GM Pedrollo. Key specifications: capacity Up to 400 l/min (24 m³/h), motor 2-pole, motor casing Stainless steel AISI 304.

A submersible sewage and dirty water pump is a pump that is immersed to draw up and discharge dirty water with suspended solids, light sludge and wastewater.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower it into the sump or excavation hanging from its handle on a rope or chain, never by the cable, and stand it on a firm base, raised above the sludge. Connect the delivery pipe without kinks and check that the float can move freely. Never run it dry; after pumping dirty water, run it in clean water and check the impeller.

Where it is used

  • Water engineering works
  • Civil protection

Technical data

  • Capacity: Up to 400 l/min (24 m³/h)
  • Motor: 2-pole
  • Motor casing: Stainless steel AISI 304
  • Head: Up to 13 m
  • Liquid temperature: Up to +40 °C
  • Solids passage: Up to Ø 30 mm for ZXm 2/30-GM – up to Ø 40 mm for ZXm 2/40-GM
  • Maximum operating depth: Up to 5 m (with a suitably long power cable)
  • Minimum immersion for continuous duty: 265 mm for ZXm 2/30-GM – 275 mm for ZXm 2/40-GM
  • IP protection rating: IP68
  • Pump body: Glass fibre-filled technopolymer
  • Impeller: Glass fibre-filled technopolymer
  • Shaft: Stainless steel AISI 431

Who it is for

Designed for plumbers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 12
CapacityUp to 400 l/min (24 m³/h)
Motor2-pole
Motor casingStainless steel AISI 304
HeadUp to 13 m
Liquid temperatureUp to +40 °C
Solids passageUp to Ø 30 mm for ZXm 2/30-GM – up to Ø 40 mm for ZXm 2/40-GM
Maximum operating depthUp to 5 m (with a suitably long power cable)
Minimum immersion for continuous duty265 mm for ZXm 2/30-GM – 275 mm for ZXm 2/40-GM
IP protection ratingIP68
Pump bodyGlass fibre-filled technopolymer
ImpellerGlass fibre-filled technopolymer
ShaftStainless steel AISI 431

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlNon-toxic coiled hose

Carry water for irrigating, washing and supplying machines in the garden and on site.