0 Quotes 0Compare
0 Compare 0 Quotes
Tutti gli argomenti
Blog AMES

Guides

469 articoli pubblicati

How to choose a safety helmet: standard, use and spare partsFor a building site you need an EN 397 safety helmet; for work at height one that is also marked EN 12492 and has a c... How to choose a jib hoist: rated load, tripod or supportJib, tripod or trestle-stand hoist: choose according to the rated load (100-800 kg in the collection), the lifting sp... How to choose an oscillating multi-tool: cordless or cordedFor flush cuts, scraping and sanding in tight spaces choose a cordless multi-tool (12, 18 or 40 V); if you work in a ... How to choose a submersible pump for drainage: single-phase or three-phaseTo empty flooded excavations, cellars and sumps, choose the submersible pump according to the liquid (clear, cloudy o... How to choose a laser distance meter: range, accuracy and displayA laser distance meter measures distances, areas and volumes without a tape measure. In the collection the range runs... How to choose tile spacers: cross spacers or levelling systems?For regular joints, cross spacers are enough; for large slabs and aligned surfaces you need levelling systems with cl... How to choose a rope access device: descender or ascender?Descenders, ascenders and sliding fall arresters are used to descend, climb or protect yourself on a rope. Choose by ... How to choose a universal laser-welded diamond blade: diameter and boreThe universal laser-welded blade cuts concrete, bricks and stone with a single blade. Choose the diameter to suit the... Diamond blade for granite, marble or metal: how to chooseGranite, marble, refractories and metal each need a dedicated diamond blade. Choose by material, then check the diame... Blade for ceramic and porcelain stoneware: continuous rim or turbo?For tiles and porcelain stoneware choose the continuous rim for a chip-free edge, the turbo for faster cutting. A thi... How to choose a flap disc: grit, abrasive and maximum speedChoose a flap disc by grit (40 for roughing, 80-120 for finishing), by abrasive (zirconia, ceramic, corundum) and by ... How to choose a diamond blade: segment, material and diameterChoose a diamond blade by material: segmented for reinforced concrete and bricks, continuous rim for porcelain stonew... Metal cutting discs: choosing the thickness and diameterThe metal cutting disc is chosen according to the machine (diameter, bore, rpm) and the workpiece: thin (1-1.6 mm) fo...

Altri argomenti