A.M.E.S. srlMulti-material drill bits krino
Drill plasterboard, wood, plastic and light masonry with one tool mounted on the drill.
All Fischer products
Anchor fixing DuoTec
Key features
- Hole diameter (mm)10
- MaterialNylon
- Hole (mm)10
- With or without screwWithout screw, with TSP screw 4.5 x50 mm
What it is
Anchor fixing DuoTec. Key specifications: hole diameter (mm) 10, material Nylon, hole (mm) 10.
Plasterboard and insulation fixings are fixings that open out behind the board or hold insulation panels in place, for fixing to hollow walls and ETICS insulation systems.
What it is for
Used for general-purpose fixing into masonry, concrete and timber and for fixing into plasterboard and lightweight partitions.
How to use it
Drill the board with a suitable bit or screw the self-drilling plug in directly, without hammer action. Insert the fixing and tighten it until it opens out behind the board, without overtightening so as not to break through the plasterboard. For insulation, drill through to the load-bearing substrate and insert the fixing flush with the panel, using the specified setting tool.
Where it is used
- Residential construction
- Building maintenance
Technical data
- Hole diameter (mm): 10
- Material: Nylon
- Hole (mm): 10
- With or without screw: Without screw, with TSP screw 4.5 x50 mm
Who it is for
Designed for drywall installers, electricians, plumbers and building maintenance operatives.
Related products
- Nylon toggle fixing DuoTec Fischer
- Screw-in fixing FIF-CS Fischer
- Multi-material drill bits krino — from the category Multi-Material Drill Bits
- Cordless drill driver brushless 18V AEG BS18CBL — from the category Drill Drivers
- Profile pliers 0555.010 — from the category Other Drywall Tools
- Browse the whole category: Plasterboard and Insulation Fixings
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Hole diameter (mm) | 10 |
|---|---|
| Material | Nylon |
| Hole (mm) | 10 |
| With or without screw | Without screw, with TSP screw 4.5 x50 mm |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
AEGBrushless drill driver 18V AEG BS18C3BL with 2 batteries,...
Drill and drive screws cordless, with an adjustable clutch to avoid stripping the screws.
A.M.E.S. srlScrewdriver for hose clamps
Drive and remove screws by hand, even where the drill driver cannot reach.
A.M.E.S. srlPH2 bit for plasterboard with magnet and depth limiter 1/...
Transmit the driver's force to the screw, with the right profile for each head.