Lift and pressurise clean water from wells, cisterns and tanks.

Level alarm kit, Rototec
Key features
- Signalling90 dB acoustic siren at 1 m + red electronic beacon
- Power supply (V)12
- InputsVery low voltage for clean N.O. and N.C. contacts
- CasingABS with strain-relief cable gland outlet
- IP protection ratingIP55
- DimensionsH 160 × L 160 × P 140 mm
What it is
The Rototec level alarm kit (item KALARM) consists of an electric float switch on a support rod and an electrical panel with a 90 dB siren at 1 m and a red electronic flashing light. The panel is powered at 12 V, has extra-low-voltage inputs for dry N.O. and N.C. contacts and an IP55 ABS enclosure with strain-relief cable glands, measures 160 x 160 x 140 mm and weighs 0.5 kg.
Level indicators and alarms show or signal how much water is in the tank.
What it is for
Used for water drainage, for filtering system water and in the installation and maintenance of plumbing systems.
How to use it
Fit them at the designated point on the tank following the instructions and, for the alarm, connect it to the power supply. Check operation with the tank nearly full and nearly empty. Clean the float or probe if they get dirty.
Where it is used
- Agriculture
- Professional landscaping and gardening
- Building services
- Water engineering works
Technical data
- Signalling: 90 dB acoustic siren at 1 m + red electronic beacon
- Power supply (V): 12
- Inputs: Very low voltage for clean N.O. and N.C. contacts
- Casing: ABS with strain-relief cable gland outlet
- IP protection rating: IP55
- Dimensions: H 160 × L 160 × P 140 mm
- Weight (kg): 0,5
Who it is for
Designed for gardeners, plumbers, agricultural workers and heating and plumbing engineers.
Standards and safety
DPR 547; CEI standards; Drinking water certificate.
Related products
- Pressurisation kit with 8 l diaphragm vessel and electronic control panel KITPRESS Rototec
- Single-phase inverter for pumps up to 1.5 kW INVEPW1P Rototec
- Outdoor tanks, polyethylene Kitank, Rototec — from the category Outdoor Tanks
- Water pressure booster system with polyethylene tank and submersible pump Rototec — from the category Clean Water Pumps
- Connector for flat thin roofing ESN Fakro — from the category Sealing Fittings
- Browse the whole category: Water Accessories
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 7
| Signalling | 90 dB acoustic siren at 1 m + red electronic beacon |
|---|---|
| Power supply (V) | 12 |
| Inputs | Very low voltage for clean N.O. and N.C. contacts |
| Casing | ABS with strain-relief cable gland outlet |
| IP protection rating | IP55 |
| Dimensions | H 160 × L 160 × P 140 mm |
| Weight (kg) | 0,5 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Seal threaded joints and fittings, preventing water and gas leaks.
Carry water for irrigating, washing and supplying machines in the garden and on site.
Join pipes and components of water systems with threaded joints and reducers.




