NPT SigillDispensing gun BX 70 for 50 ml two-component cartridges N...Code pistola-bx-70
Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.
All NPT Sigill products
Bituminous gasket Bitum Gasket NPT Sigill
Key features
- TypeElastoplastic bituminous adhesive sealant
- ColourBlack
- Open time (min)max 15
- Shore A hardnessca. 22
- Specific weight (g/cm³)1,02
- Application temperature (°C)da 5 a 30
What it is
Elastoplastic sealant adhesive based on elastomeric resins that adhere to bitumen and the most common building materials, even on wet surfaces, forming a flexible joint. Fields of application Specifically for the repair of bituminous membranes and the bonding and sealing of coverings, insulating materials (except EPS and XPS), roof tiles, tiles and plastic surfaces (without plasticisers). It allows the sealing and waterproofing of joints, cracks, various types of breakage and swelling, underbody coating of vehicles, caravans, etc. Adheres to concrete, zinc, wood, aluminium, sheet metal, etc., even when damp. Good occasional resistance to solvents, except mineral oils and spirits. It cannot be overcoated.
Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).
What it is for
Used for waterproofing roofs, terraces and below-ground structures, for structural and assembly bonding and for sealing joints, gaps and service penetrations.
How to use it
Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.
Where it is used
- Residential construction
- Renovation
Technical data
- Type: Elastoplastic bituminous adhesive sealant
- Colour: Black
- Open time (min): max 15
- Shore A hardness: ca. 22
- Specific weight (g/cm³): 1,02
- Application temperature (°C): da 5 a 30
- Thermal resistance (°C): da -35 a +110
- Capacity (ml): 300 (cartridge)
Who it is for
Designed for waterproofing specialists and bricklayers.
Related products
- Black liquid gasket, Black RTV Gasket, NPT Sigill
- Preformed butyl rubber tape in rolls Bond Strip NPT Sigill
- Spray gun PM3 NPT Sigill — from the category Adhesive and Sealant Application Systems
- Masking paper tape NPT Sigill — from the category Paper Masking Tapes
- Foam remover Polipur NPT Sigill — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 8
| Type | Elastoplastic bituminous adhesive sealant |
|---|---|
| Colour | Black |
| Open time (min) | max 15 |
| Shore A hardness | ca. 22 |
| Specific weight (g/cm³) | 1,02 |
| Application temperature (°C) | da 5 a 30 |
| Thermal resistance (°C) | da -35 a +110 |
| Capacity (ml) | 300 (cartridge) |
Compare with similar models
Technical data declared by the manufacturers. An empty cell means the figure is not declared.
| Feature |
This model
Bituminous gasket Bitum Gasket NPT Sigill
|
Bituminous adhesive sealant Sigill Bitum Gasket 300 ml NPT Sigill
|
Black liquid gasket, Black RTV Gasket, NPT Sigill
|
Liquid gasket Silgasket Red NPT Sigill
|
|---|---|---|---|---|
| Brand | NPT Sigill | NPT Sigill | NPT Sigill | NPT Sigill |
| Type | Elastoplastic bituminous adhesive sealant | Elastoplastic bituminous adhesive sealant | Single-component acetic-cure RTV silicone | — |
| Colour | Black | Black | Black | Red |
| Open time | max 15 | max 15 | — | — |
| Shore A hardness | ca. 22 | ca. 22 | ca. 22 | ca. 30 |
| Specific weight | 1,02 g/cm³ | 1,02 g/cm³ | ca. 1,03 | ca. 1,08 |
| Application temperature | da 5 a 30 | da 5 a 30 | — | — |
| Thermal resistance | da -35 a +110 | da -35 a +110 | -40 to +250 (peaks up to 300) | -60 to +260 (peaks up to 300) |
| Capacity | 300 (cartridge) | 300 (cartridge) | 80 (tube) | 200 ml |
| View product → | View product → | View product → |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
NPT SigillSensitive paper tape NPT Sigill
Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.
MetricaUtility knife Black Bull, 25 mm, with clamping screw, Met...
Cut cardboard, tapes, membranes and carpet with the retractable blade.
Co.Me SpaNotched trowel Co.Me Spa
Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.
For safety
Neri100% Cotton Continuous-Thread Glove, White, Neri 335035Code 335035
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.