Carry water for irrigating, washing and supplying machines in the garden and on site.

Electric pump PKS Pedrollo
Key features
- CapacityUp to 50 l/min (3.0 m³/h)
- Head (m)up to 70
- Gauge suction height (m)up to 9
- Liquid temperatureFrom -10 °C to +60 °C
- Ambient temperatureUp to +40 °C (+50 °C for PKS 60)
- Max pressure in the pump body6 bar for PKS 60, PKS 65 – 7 bar for PKS 80
What it is
PKS (code PKS) is a Pedrollo electric pump — self-priming electric pumps with peripheral impeller, with flow rate up to 50 l/min (3.0 m³/h), head up to 70 m, manometric suction lift up to 9 m. Professional product, reliable for intensive use.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 50 l/min (3.0 m³/h)
- Head (m): up to 70
- Gauge suction height (m): up to 9
- Liquid temperature: From -10 °C to +60 °C
- Ambient temperature: Up to +40 °C (+50 °C for PKS 60)
- Max pressure in the pump body: 6 bar for PKS 60, PKS 65 – 7 bar for PKS 80
- Motor: 2-pole
- IP protection rating: IPX4
- Pump body: Cast iron
- Impeller: Brass
- Shaft: Stainless steel AISI 431, stainless steel AISI 430F (for PKS 60, PKS 65)
- Lantern: Aluminium with brass lid
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump PLURIJET 80-100 Pedrollo
- Electric pump PKm 60 Pedrollo
- Tricotop grey hose — from the category Water Hoses and Layflat Hoses
- Sockets MF art. 529 A — from the category Galvanised Pipe Fittings
- Outdoor storage unit for tanks Butti — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 12
| Capacity | Up to 50 l/min (3.0 m³/h) |
|---|---|
| Head (m) | up to 70 |
| Gauge suction height (m) | up to 9 |
| Liquid temperature | From -10 °C to +60 °C |
| Ambient temperature | Up to +40 °C (+50 °C for PKS 60) |
| Max pressure in the pump body | 6 bar for PKS 60, PKS 65 – 7 bar for PKS 80 |
| Motor | 2-pole |
| IP protection rating | IPX4 |
| Pump body | Cast iron |
| Impeller | Brass |
| Shaft | Stainless steel AISI 431, stainless steel AISI 430F (for PKS 60, PKS 65) |
| Lantern | Aluminium with brass lid |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




