Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.

Sealant SiMP-Seal 650 NPT Sigill
Key features
- Regulations/complianceEMICODE EC1 Plus; LEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg 8 Rule 51; CARB VOC regulation.
What it is
is a one-component SiMP - Silyl Modified Polymer elastic adhesive and sealant, multipurpose, with very low emissions and completely odourless. It cures under the influence of atmospheric moisture to form a high-performance, permanently flexible elastic adhesive. Free of solvents and isocyanates, it has zero VOC and no shrinkage. Application areas: it is a versatile, high-performance elastic adhesive and sealant for elastic bonding and sealing applications in industrial assembly, automotive, transport (buses, caravans, refrigerated vehicles, containers), marine, air-conditioning and ventilation systems, where a flexible joint or a powerful odourless elastic adhesive is required during the process and service life. Ideal for short-duration high-temperature (180° C) paint curing in industrial processes.
Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).
What it is for
Used for waterproofing roofs, terraces and below-ground structures, for structural and assembly bonding and for sealing joints, gaps and service penetrations.
How to use it
Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.
Where it is used
- Residential construction
- Renovation
Who it is for
Designed for waterproofing specialists and bricklayers.
Standards and safety
EN 45545 ISO 37 LEED iEQc 4.1 EMICODE EC1 CARB VOC CARB VOC SCAQMD 1168 BAAQMD Reg 8 Rule 51 CARB VOC regulation 1 Technical data sheet SiMP BAAQMD Reg 8 Rule 51 CARB VOC regulation FIELDS OF APPLICATION SiMP DIN 53505 DIN 53504 ISEGA
Product code: SIMPSEAL650
Related products
- Sealant SiMP-Seal Teak 680 NPT Sigill
- Sealant SiMP-Seal 640 NPT Sigill
- Spray gun CCA 380 NPT Sigill — from the category Adhesive and Sealant Application Systems
- Paper tape for outdoor use NPT Sigill — from the category Paper Masking Tapes
- Foam remover Polipur NPT Sigill — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 1
| Regulations/compliance | EMICODE EC1 Plus; LEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg 8 Rule 51; CARB VOC regulation. |
|---|
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.
Cut cardboard, tapes, membranes and carpet with the retractable blade.
Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





