NPT SigillReinforced manual gun for 310 ml cartridges NPT SigillCode pistola-manuale-rinforzata
Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.
All NPT Sigill products
Polyurethane sealant U-Seal 906 AS NPT Sigill
Also known as: PU sealant, polyurethane caulk
Key features
- Regulations/complianceLEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg. 8 Rule 51
What it is
is a one-component, hydro-expanding polyurethane adhesive and sealant for waterproofing construction joints in poured concrete, which activates on contact with water, turning into a sealant resistant to hydrostatic pressures of up to 5 bar. Extrudable with ordinary sealant guns, non-sagging, it cures under the influence of atmospheric moisture and of the moisture present in the concrete in order to seal all types of construction, hydraulic or penetration joints in concrete structures, and then expands on any contact with water, even cyclical. Certified to: LEED iEQc 4.
Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).
What it is for
Used for pouring concrete, from formwork to vibration, for waterproofing roofs, terraces and below-ground structures and for sealing joints, gaps and service penetrations.
How to use it
Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.
Where it is used
- Residential construction
- Civil engineering
- Water engineering works
Technical data
- Regulations/compliance: LEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg. 8 Rule 51
Who it is for
Designed for formwork carpenters, concrete workers, waterproofing specialists and bricklayers.
Standards and safety
ISO 37 LEED iEQc 4.1 Rule SCAQMD 1168 BAAQMD Reg 8 Rule 51 FIELDS OF APPLICATION LEED iEQc 4.1 SCAQMD 1168 BAAQMD Reg 8 Rule 51 FIELDS OF APPLICATION BAAQMD Re g 8 Rule 51 FIELDS OF APPLICATION U DIN 53505 DIN 53504
Product code: USEAL906AS
Related products
- Sealant Sigill Acrilfuoco 240 NPT Sigill
- Polyurethane sealant U-Seal 816 NPT Sigill
- Replacement mixers for two-component syringe NPT Sigill — from the category Adhesive and Sealant Application Systems
- Washi paper tape NPT Sigill — from the category Paper Masking Tapes
- Single-component, closed-cell polyurethane foam Polipur Idraulica NPT Sigill — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Item code | U-Seal 906 AS |
|---|---|
| Regulations/compliance | LEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg. 8 Rule 51 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
NPT SigillMasking paper tape NPT SigillCode nastro-maschera
Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.
MassUtility knife, black blade, SK2 Plus, MassCode cutter-lama-nera-sk2-plus-mass
Cut cardboard, tapes, membranes and carpet with the retractable blade.
PavanGlazier's trowel with curved blade 510 Pavan
Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.
For safety
NeriPolyurethane glove Ultrane 550 Mapa Neri 349051Code 349051
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.